798561
15
Zoom out
Zoom in
Previous page
1/52
Next page
15
español english français portuguese deutsch italiano
Switch o󰀨 oven
When the heating terminated, then switch o󰀨 oven and the control valve will stop emit the steam.(this is also
the cooking time).
Cooling down
1) The condition of instant cooling down
In order to reduce the temperature and pressure instantly you can push the button to make control valve
release steam (picture 11) or put the cooker under cold water for cooling. (picture 10).Then you can turn
the button anticlockwise to open the lid.
2) The condition of normal cooling down
After cooking let the cooker cool down by nature.
Open the pressure cooker
As soon as the pressure cooker cool o󰀨, then turn the button anticlockwise and open the lid. (picture 12)
1) Please operate carefully and wearing glove will be preferable in case of burning.
2) Shake the cooker lightly to balance the di󰀨erence of inside .Especially when you cook porridge or any
other sticky foods.
3) Do not turn the button by force. Or it should be slowly in order to avoid any accident arise.
4) Do not open the lid with excessive force.
Attention
1) Before using , please check the vent-pipe carefully to see whether blocked.
2) Make sure to wash the safety valve as per the instruction manual.
3) Don’t change the components at will; please contact the after-sale department when the component is
not easy to get.
5. Accidents and methods
Phase Cause Improve methods
Heating for a while,
regulator has a
sound, but
1. The regulator blocked.
2. Food remain in the Ventilator of
open area.
3. Dry heating.
4. The cooker declined.
1. Get rid of the matter.
2. Remove with needle.
3. Switch o󰀨, put the cooker at and let
the control valve incline to release
pressure, then open the lid to check.
4. Put the cooker on at.
no steam comes
out. 1. The ventilator hole blocked.
2. There is much food inside.
3. Flame is too strong
1. Get rid of matters.
2. Get rid of part food.
3. Use middle re to heat, adjust the
control valve and choose suitable
pressure.
The steam emit
from safety valve 1. The control valve and safety valve
are out of order.
2. The gasket laid incorrectly.
3. The gasket was destroyed.
4. The gasket is not clean.
5. The lid is not locked fully.
1. Remove with needle
2. Laid the gasket in correct position.
3. Replace a new gasket.
4. Clean the gasket.
5. Lock the lid properly
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sogo SS-25140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sogo SS-25140 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info