619696

Snooper SG250 GPS Golf Watch Manual

16
Zoom out
Zoom in
Previous page
1/24
Next page
16 • UK
User Tip: You have two options when setting your SG250 - GPS or MANUAL. If you select the GPS option, the time on your
SG250 will automatically be set using GPS. If you select MANUAL, you can manually set the time. We recommend you use GPS
to set the time, as it is quicker and guaranteed to be accurate.
Setting time with the GPS option
Press S1 or S5 to select GPS.
When GPS is flashing, press S3 to select.
Next, press S1 or S5 to find the correct TIME ZONE for your location. There are 106 city codes to choose from.
When you have found the correct location, press S3 to confirm.
The display will now show DST (Daylight Saving Time) ON or DST OFF.
Press S1 or S5 to switch between DST ON and DST OFF, then press S3 to confirm your selection.
The display will now show either 12H or 24H.
Press S1 or S5 to switch between the two, then press S3 to confirm your selection.
Press S7 to go back to the TIME setting sub-menu and press S7 again to return to TIME mode.
The time will automatically be set next time your SG250 connects to GPS. Your SG250 will connect to GPS when you launch
RUN or GOLF modes. Alternatively, press and hold S7 from TIME mode to manually switch GPS on.
Setting time with the MANUAL option
Press S1 or S5 to select MANUAL.
While MANUAL is flashing, press S3 to enter.
Set the HOUR by pressing S1 or S5 - then press S3 to enter.
Set the MINUTE by pressing S1 or S5 - then press S3 to enter.
Set the SECOND by pressing S1 or S5 - then press S3 to enter.
Set the YEAR by pressing S1 or S5 - then press S3 to enter.
Set the MONTH by pressing S1 or S5 - then press S3 to enter.
Set the DATE by pressing S1 or S5 - then press S3 to enter.
Set the 12/24H by pressing S1 or S5 - then press S3 to enter.
Press S3 to enter and go back to T1/T2 setting screen.
Press S7 to go back to TIME setting sub-menu, and press S7 again to return to TIME mode.
Backlight and NIGHT settings
NIGHT setting allows you to control how long the backlight comes on when you press the light button (S11) in TIME mode. NIGHT
setting also enables you to set up and use NIGHT mode.
How to set and use the backlight
Your SG250 has a backlight, so you can illuminate the screen to view the time if it’s dark. The backlight is activated by pressing the
light button (S11). You can set the backlight to come on for either 10 seconds or 20 seconds by following these instructions:
Press S7 and scroll through the modes until you see TIME.
Press and hold S11. The screen will display HOLD SET, then TIME will flash. Press S1 or S5 until you see NIGHT flashing on the
screen, then press S3 to enter.
10 SECONDS or 20 SECONDS will be displayed on the screen. Press S1 or S5 to select whether you would like the backlight to come
on for 10 seconds or 20 seconds, each time you press the light button (S11) and press S3 to confirm your selection.
Press S7 to return to the NIGHT mode sub-menu.
Press S7 again to exit and return to TIME mode.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper SG250 GPS Golf Watch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper SG250 GPS Golf Watch in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info