619696

Snooper SG250 GPS Golf Watch Manual

15
Zoom out
Zoom in
Previous page
1/24
Next page
15 • UK
To increase or decrease the LO value, press S1 or S5. When you have the right value, press S3 to confirm.
The HI value will now be flashing. Press S1 or S5 to increase or decrease the HI value. When you have the right value, press S3 to
confirm.
ALERT ON will now be flashing. Press S1 or S5 to switch between ALERT ON and ALERT OFF, then press S3 to confirm your selection.
Press S7 go back to the HRM setting screen.
User Tip: You can only have one heart rate zone switched on at any given time. Your SG250will automatically use the last zone
set to ON.
User Tip: When using the heart rate zone feature during a training session, your SG250 will beep once to alert you if your heart
rate drops below the LO heart rate you set, and will beep twice to alert you if your heart rate increases above the HI heart rate
you set for that zone.
SG250 Auto power save
When GPS is off and the HRM is not linked to your SG250, if there is no key operation for more than one minute, the display will
automatically go to the power saving screen. When in ‘power save’ mode, only the time is displayed.
To wake your SG250 while in ‘power save’ mode, press S1 to go directly to GOLF mode, or press S7 to go directly to RUN mode.
Pressing any other keys will exit the power-saving screen to TIME mode.
TIME mode functions
How to enter the TIME mode
To enter the TIME mode, press S7 and scroll through the modes until you see TIME.
There are three different TIME views to choose from:
Time only.
Time, day and date
Time and city
Press S3 to switch between views.
TIME mode settings
The time on your SG250 will be set correctly when manufactured, so it will work out of the box.
User Tip: Your SG250 comes pre-set with T1 set to LON time and T2 set to NYC time - with DST (Daylight Saving Time) set to ON.
If you want to set the time yourself, the procedure is explained below.
How to set the time
From TIME mode, you can set two different TIME zones.
From TIME mode, press and hold S11. The display will show HOLD SET and then TIME will flash.
Press S3 to confirm. T1 (Time 1) will now be displayed.
If you want to set T1 press S3. If you want to set T2 press S1 or S5 to change T1 to T2, then press S3 to confirm.
The display will now show GPS and MANUAL. Press S1 or S5 to switch between GPS or MANUAL, then press S3 to confirm your
selection.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper SG250 GPS Golf Watch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper SG250 GPS Golf Watch in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info