619693

Snooper Sapphire Manual

17
Zoom out
Zoom in
Previous page
1/24
Next page
MEM
MUTE
17
6. User Points
It is possible to add and edit your own personal locations on your Snooper Sapphire. To add a new location
make sure you are stationary and parked in a safe, legal manner then press and hold the ‘MEM’ button for
approximately two seconds.
A screen will be displayed asking if you want to ‘Save User Position?’ Use the ‘OK’ control to highlight ‘Yes’
and then press the ‘OK’ control to confirm.
To view your saved coordinates:
•
Press the ‘OK’ control when ‘User Points’ is displayed in the menu options.
•
‘Edit’ is highlighted by default. Press the ‘OK’ control to view or edit your stored coordinates.
•
To scroll through the user points you have stored push the ‘OK’ control to the right or left.
To edit the user point:
•
Once you have selected the user point that you wish
to edit push the ‘OK’ control downwards – ‘CAM
TYPE’ will be selected. Push the ‘OK’ control to the
left or the right until the correct camera type is
displayed.
•
Push the ‘OK’ control downwards – ‘LIMIT’ will be
highlighted. Push the ‘OK’ control to the right or left
until the correct speed limit for that location is
displayed.
•
Push the ‘OK’ control downwards – ‘SPD TYPE’ will
be highlighted. Push the ‘OK’ control to the left or right to select either ‘MPH’ or ‘KMH’
•
Once you have made your changes press the ‘OK’ control. The unit will display ‘Setting Confirmed’ to
indicate the changes have been saved.
Troubleshooting – Saving New Coordinates
When you attempt to save a new coordinate but the display reads ‘Weak Signal!’ it means that your Snooper
Sapphire is not receiving sufficient signal strength to plot the position. Please ensure that the Snooper
Sapphire flip up GPS antenna has a clear view of the sky, the unit is displaying the standby screen and try again.
When you attempt to save the new coordinate and the display reads ‘Memory Full’ it means that the memory in
your Snooper Sapphire is completely full. If you want to store any new coordinates you will have to either
delete some or all of the existing coordinates stored in the unit’s memory.
Deleting Stored Coordinates
If you would like to delete any of the coordinates you have stored in your units memory:
•
Press the ‘OK’ control when ‘User Points’ is displayed in the menu options.
•
To delete individual user points highlight ‘Delete’ by pushing the ‘OK’ control downwards. Once ‘Delete’ is
selected press the ‘OK’ control.
•
Push the ‘OK’ control to the right or left to scroll through the stored user points. Once the coordinates you
wish to delete are visible on the display, press the ‘OK’ control button.
•
A new screen will be displayed asking you to ‘Confirm Delete?’. If you wish to delete the coordinate highlight
‘Yes’ and then press the ‘OK’ control. If you do not wish to delete the coordinate highlight ‘No’ and then press
the ‘OK’ control.
•
The Sapphire will confirm the coordinate has been deleted by displaying ‘Position Cleared’.
To delete all the user stored coordinates on the Sapphire
•
Press the ‘OK’ control when ‘User Points’ is displayed in the menu options.
•
Highlight the ‘Delete All’ option by pushing the ‘OK’ control upwards or downwards then press the ‘OK’ control.
•
A new screen will be displayed asking you to ‘Confirm Delete?’ with the options of ‘Yes’ or ‘No’. Highlight
your desired option then press the ‘OK’ control to confirm deletion. The unit will confirm the coordinates have
been deleted by displaying ‘Position Cleared’.
Back to contents
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper Sapphire at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper Sapphire in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snooper Sapphire

Snooper Sapphire Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info