619690
8
Zoom out
Zoom in
Previous page
1/14
Next page
7
Downloading
Your Snooper S3 neo comes ’unpopulated’ so before use, you will need
to download all the location co-ordinates on our database by connecting
the device to your PC.
Performing a download is simple but first of all you will have to install the
downloading software on to your PC by using the CD Rom included with
this product. Simply put the CD into an available CD drive and follow the
on screen instructions.
Once the the S3 download software has been installed, double click on
the S3 download software icon that should now have appeared on your
desk top and follow the on-screen instructions carefully. Connect the
RS232 cable to a spare comport on your computer, connecting the
opposite end of the lead to the socket marked RS232 on your S3. Next
plug the 240V power supply into a standard UK wall socket and plug the
opposite end of this lead into the socket on the back of the unit marked
DC 12V. Note: Do not use any other 240V power supply than the one
provided. Using a different power supply may damage your unit and
will invalidate the warranty. Next switch your S3 on by turning the on/off
volume control towards you. Follow the on-screen instructions until you
reach the screen featuring the ’Start Update’ button. You have the
opportunity here to select between downloading the Camera only
database or the Camera and Schools database, by clicking on the
’Download File’ drop down and highlighting the file you would like. Finally
once you have made your selection press ’Start Update’ and the
download will run automatically whilst the on-screen display will keep you
informed of it’s progress.
As there are constant additions to our location database you will need to
perform regular downloads. The frequency with which you do this is
entirely up to you, but we recommend that higher mileage drivers often
driving on unfamiliar roads, download once or twice a week whereas
lower mileage drivers perform a download once or twice a month.
Once the download has been completed your S3 is ready for use.
Please note that you will need to register your Snooper S3 before
you can perform any downloads.
20
Features and Settings
1. Pre-Alert Setting
The PreAlert setting allows you to adjust the distance that your S3 will
detect from when utilising GPS. To enter the ’PreAlert’ setting from the
Standby screen press the MUTE button for approximately 2 seconds.
The display will show the letter ’D’ and then indicate the pre-alert distance
currently selected. Next using either the MUTE button or the CANCEL
button scroll up or down until your desired pre-alert distance is displayed
and press SELECT. You can set your S3 to alert from 100-500m.
If you do not press any buttons for a period of 5 seconds you will
automatically exit the pre-alert setting and return to the standby display
without adjusting the distance.
2. Setting Brightness
You can adjust the brightness of the display on your S3 by pressing the
cancel button when the unit is not detecting or locating a signal. There
are 2 levels of brightness to choose from bright or dimmed.
3. Adjusting the volume
The S3 has an adjustable volume for controlling the loudness of the
audible alert. To increase the volume simply turn the volume control on
the right hand side of the device, towards you. To decrease the volume of
the alert turn the volume control away from you.
CANCEL
NEW LOCATION
MUTE
Number indicates distance i.e. 2 = 200m
POWER ON/OFF
OFF
2
EAR
Volume Control
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper S3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper S3 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info