619670

Snooper Lynx Manual

12
Zoom out
Zoom in
Previous page
1/22
Next page
12
Return to contents
Logic 2 (Factory Default Setting)
When Logic 2 is selected your unit will alert you both audibly and visually as you approach xed safety cameras on your side of the
carriageway only.
Logic 3
When Logic 3 is selected your unit will alert you to xed safety cameras on both sides of the carriageway but will alert you audibly
in dierent tones depending on your user settings. If, for example, you select the ‘Hard’ tone for alerting you to xed safety cameras
then you will be alerted to a camera on your side of the road in a ‘Hard’ tone but if the camera is on the opposite side of the road the
audible alert provided will be in the ‘Soft’ tone and vice versa.
To change the Logic Mode of your unit please refer to the ‘Logic’ section on page 16.
6. Alert Patterns
Fixed Speed Safety Cameras
As you approach a xed speed safety camera the unit will begin to emit either a voice alert or your chosen audible alert at your
preset alert distance. As you approach the xed speed safety camera the ‘beeping’ will quicken. At the same time the display will
indicate the type of location you are approaching, the speed limit at that location and will then begin to count down the distance in
50 metre increments to that location. The unit will continue to alert you until you have passed the xed speed safety camera.
Automute
When your device alerts you to a location, rather than continually beeping through the alert, it simply beeps at your selected volume
for ve seconds and then automatically mutes the sound to volume level 3 until you have passed or moved out of range of the xed
speed safety camera. This allows you to receive a brief audible alert instead of a continuous one.
Note: This function is built into the unit and cannot be switched on or off.
If you would like to change the alert to a visual alert only press the ‘Target’ button to temporarily turn o the sound. If at any time
you would like to stop the alert, simply press and hold the ‘Target’ button.
7. Road Type
CITY
In ‘CITY’ mode Lynx will only provide alerts to xed speed safety cameras that are located
on ‘A’ or ‘B’ classied roads and are in range of your unit.
MOTORWAY
In Motorway mode (displayed as M-way) Lynx will only provide alerts for xed speed
safety cameras located on a motorway and are within range of your device.
Note: If your speed drops below 20mph the device will sound an audible alert and the
‘Select Road Type’ screen will be displayed to remind you that you may no longer be
travelling on a motorway and may need to change the mode of the unit to ‘CITY’ or ‘ALL’.
ALL (Recommended)
In ‘ALL’ mode Lynx will provide alerts on all road types of any xed speed safety cameras that are within range of the unit. Note: If you
were travelling on a section of motorway for example it would mean that the unit could detect locations situated on an ‘A’ or ‘B’ road
that is near to the motorway. As it is not on the road you are travelling though, it is not a threat and you might prefer to select the
‘M-way’ setting so that the unit would ignore these unwanted alerts.
PLEASE NOTE: Whilst in CITY mode the device will not detect any locations located on a motorway. When the unit is in MWAY mode
the unit will not detect any locations located on ‘A’ or ‘B’ roads so you need to remember to change modes when leaving an ‘M’ type
road.
Select Road Type
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper Lynx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper Lynx in the language / languages: English as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info