809886

Snom M200 SC Base Station Manual

52
Zoom out
Zoom in
Previous page
1/120
Next page
52
v1.01
M200SC Administrator and Provisioning Manual Configuration using the Web user interface (WebUI)
The provisioning process functions according to the Resynchronization settings and Provisioning Server
Settings. The M200SC checks for the provisioning URL from the following sources in the order listed below:
1. PnP—Plug and Play Subscribe and Notify protocol
2. DHCP Options
3. Preconfigured URL—Any M200SC updated to the latest firmware release will have the URL to Snom’s
secure redirection and provisioning service (SRAPS) server available as the default provisioning server
URL (see setting "provisioning.server_address" on page 85). To sign up for this service, go to https://
www.snom.com/solutions/sraps/ or directly to the SRAPS portal at https://sraps.snom.com/customer/#/
login.
If one of these sources is disabled, not available, or has not been configured, the M200SC proceeds to the next
source until reaching the end of the list.
The provisioning settings are also available as parameters in the configuration file. See "provisioning Module:
Provisioning Settings" on page 85.
Provisioning Ssettings
Setting Description
Server URL URL of the provisioning file(s). The format of the URL must be RFC 1738
compliant, as follows: “<schema>://<user>:<password>@
<host>:<port>/<url-path>” “<user>:<password>@” may be
empty.
“<port>” can be omitted if you do not need to specify the port number.
The default URL is the Snom redirect server: https://et.Snomphones.com/
rg2/
Server authentica-
tion name
User name for access to the provisioning server
Server authentica-
tion password
Password for access to the provisioning server
Plug-and-play settings
Setting Description
Enable PnP Subscribe Select to enable the M200SC to search for the provisioning URL via a SUB-
SCRIBE message to a multicast address (224.0.1.75). The M200SC expects
the server to reply with a NOTIFY that includes the provisioning URL. The
process times out after five attempts.
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M200 SC Base Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M200 SC Base Station in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info