809886

Snom M200 SC Base Station Manual

53
Zoom out
Zoom in
Previous page
1/120
Next page
53
v1.01
M200SC Administrator and Provisioning Manual Configuration using the Web user interface (WebUI)
DHCP Settings
Setting Description
Use DHCP Options Enables the M200SC to use DHCP options to locate and retrieve the con-
figuration file. When selected, the M200SC automatically attempts to get
a provisioning server address, and then the configuration file. If DHCP op-
tions do not locate a configuration file, then the server provisioning string
is checked.
Note: Ensure that DHCP is also enabled on the “Basic Network Settings”
page.
DHCP Option Priority 1 If DHCP is enabled, sets the DHCP Option priority. Select the highest priority
option.
DHCP Option Priority 2 If DHCP is enabled, sets the DHCP Option priority. Select the second highest
priority option.
DHCP Option Priority 3 If DHCP is enabled, sets the DHCP Option priority. Select the third highest
priority option.
Vendor Class ID (DHCP
60)
DHCP Option 60 is available to send vendor-specific information to the DHCP
Server.
User Class Info (DHCP
77)
DHCP Option 77 is available to send vendor-specific information to the DHCP
Server.
Resynchronization
Setting Description
Mode Sets which files the M200SC will check for. It can check for configuration
files, firmware update files (from the URL entered on the Firmware Server
Settings page), or both.
Note: When checking for both configuration and firmware files, the firm-
ware URL can be within the config file. This firmware URL takes take pre-
cedence over the URL on the Firmware Server Settings page. It will also
update the URL on the Firmware Server Settings page. This allows you to
change the firmware URL automatically.
Bootup Check Sets the M200SC to check the provisioning URL for new configuration and/
or firmware files upon bootup. The update is applied as part of the reboot
process.
Schedule Check: Disable When selected, disables regularly scheduled file checking.
… 53 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M200 SC Base Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M200 SC Base Station in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info