809886

Snom M200 SC Base Station Manual

35
Zoom out
Zoom in
Previous page
1/120
Next page
35
v1.01
M200SC Administrator and Provisioning Manual Configuration using the Web user interface (WebUI)
Network Pages
You can set up the M200SC for your network configuration on the network pages. Your service provider may
require you to configure your network to be compatible with its service, and the M200SC settings must match
the network settings.
The network settings are grouped into basic and advanced settings. IPv4 and IPv6 protocols are supported.
When both IPv4 and IPv6 are enabled and available, the following guidelines apply when determining which
stack to use:
◦ For outgoing trac, the IP address (or resolved IP) in the server field—either IPv4 or IPv6—will
determine which stack to be used.
◦ In general, most operations can be associated with one of the servers listed on the “Basic Network
Settings” page. However, for operations triggered by/dependent upon network status, the phone must
determine which server to use. For example, a special case like the “Network down” LED indication
on the base station can be ambiguous for server association. Because its primary purpose is to aid in
troubleshooting SIP registration issues, this case will be associated with the SIP registration server.
◦ DNS entries with both IPv4 and IPv6 settings can be used to resolve FQDN entries. There are no
preferences with the order of the DNS queries.
◦Pcap should include trac for both stacks.
◦Dual stack operations should be transparent to PC port trac.
After entering information on this page, click to save it.
NOTE: PnP is not supported in IPv6. VPN is not supported in IPv6 and PPPoE.
The network settings are also available as parameters in the configuration file. See "network Module: Network
Settings" on page 81 .
Basic Network Settings
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M200 SC Base Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M200 SC Base Station in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info