809886

Snom M200 SC Base Station Manual

33
Zoom out
Zoom in
Previous page
1/120
Next page
33
v1.01
M200SC Administrator and Provisioning Manual Configuration using the Web user interface (WebUI)
Variable value Description
SIPUSERNAME SIP Account User Identifier
DISPLAYNAME SIP Account Display Name
LOCALIP Phone’s local IP Address
INCOMINGNAME Caller ID name of the current Incoming Call
REMOTENUMBER Remote party phone number (Incoming or Outgoing)
REGISTRATIONSTATE Registration state available from the Registration event. Values are:
◦REGISTERED
◦DEREGISTERED
◦FAIL
MAC The phone’s MAC Address
MODEL The phone’s model number: M200SC.
Action URI
Setting Description
End of boot sequence The End of boot sequence URI is triggered at the end of the phone boot
sequence.
Using the End of boot sequence URI it is possible to develop self-provi-
sioning on the phone. For example, an XML application can identify the
phone and generate a MAC-specific file on the fly.
Successful Registration The Successful Registration URI is triggered the first time the phone reg-
isters successfully to a SIP Account. If the phone registers to multiple SIP
Accounts, then the Successful Registration URI is triggered for each line.
On Hook The On Hook URI is triggered when the phone transitions from Active to
Idle (or from Paging to Idle). For example, when:
◦The user presses the END soft key
◦The user hangs up the handset during a call
◦A transfer is completed and the user returns to idle
◦The far end hangs up
◦The call was not answered
◦The call fails.
O Hook The O Hook URI is triggered when the user goes to Dial mode by:
◦Lifting the handset
◦Pressing the speakerphone key
◦Pressing the NEW soft key during a held call.
Note that the O Hook URI will NOT be triggered when calling a pre-defined
number and going immediately to Dialing mode—this event triggers the
Outgoing Call URI instead.
Incoming Call The Incoming Call URI is triggered for each Incoming Ring event or Call
Waiting event. Using the Incoming Call URI, it is possible to display extra
information on the phone for an Incoming Call. For example, the XML ap-
plication that is called when there is an Incoming Call can do a database
lookup and display information on the caller.
Note that this Action URI will not be triggered if DND or Call Forward All is
enabled or if Call Waiting is disabled (i.e., the call is rejected).
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M200 SC Base Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M200 SC Base Station in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info