809886
36
Zoom out
Zoom in
Previous page
1/120
Next page
36
v1.01
M200SC Administrator and Provisioning Manual Configuration using the Web user interface (WebUI)
Click the link for each setting to see the matching configuration file parameter in "network Module: Network
Settings" on page 81 . Default values and ranges are listed there.
Note: You must be familiar with TCP/IP principles and protocols to configure static IP settings.
IPv4
Setting Description
Disable Disables all related IPv4 settings.
DHCP DHCP is selected (enabled) by default, which means the M200SC will get
its IP address, Subnet Mask, Gateway, and DNS Server(s) from the network.
When DHCP is disabled, you must enter a static IP address for the M200SC,
as well as addresses for the Subnet Mask, Gateway, and DNS Server(s).
Static IP When Static IP is selected, you must enter a static IP address for the
M200SC, as well as addresses for the Subnet Mask, Gateway, and DNS
Server(s).
IP Address If DHCP is disabled, enter a static IP address for the M200SC.
Subnet Mask Enter the subnet mask.
Gateway Enter the address of the default gateway (in this case, your router).
PPPoE Select to enable PPPoE (Point-to-Point Protocol over Ethernet) mode.
PPPoE Username Enter your PPPoE account username.
PPPoE password Enter your PPPoE account password.
Manually Configure DNS Select to enable manual DNS configuration.
Primary DNS If DHCP is disabled, enter addresses for the primary and secondary DNS
servers.
Secondary DNS
IPv6
Setting Description
Disable Disables all related IPv6 settings.
Auto Configuration Auto configuration is selected (enabled) by default, which means the
M200SC will get its IP address, Gateway, and DNS Server(s) from the net-
work. When Auto Configuration is disabled, you must enter a static IP address
for the M200SC, as well as addresses for the Gateway and DNS Server(s).
Static IP When Static IP is selected, you must enter a static IP address for the
M200SC, as well as an IPv6 address prefix, Gateway, and DNS Server(s).
IP Address If Auto Configuration is disabled, enter a static IP address for the M200SC.
Prefix (0–128) Enter the IPv6 address prefix length (0 to 128 bits).
Gateway Enter the address of the default gateway (in this case, your router).
Manually Configure DNS Select to enable manual DNS configuration.
Primary DNS If Auto Configuration is disabled, enter IP addresses for the primary and
secondary DNS servers.
Secondary DNS
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M200 SC Base Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M200 SC Base Station in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info