809886

Snom M200 SC Base Station Manual

20
Zoom out
Zoom in
Previous page
1/120
Next page
20
v1.01
M200SC Administrator and Provisioning Manual Configuration using the Web user interface (WebUI)
System Pages
SIP Account Management
On the SIP Account Management pages, you can configure each account you have ordered from your service
provider. The SIP Account settings are also available as parameters in the configuration file. See "sip_account
Module: SIP Account Settings" on page 69.
General Account Settings
Click the link for each setting to see the matching configuration file parameter in the "Configuration file
parameter guide" on page 67 . Default values and ranges are listed there.
Setting Description
Enable Account Enable or disable the SIP account. Select to enable.
Account Label Enter the name that will appear on the handset display when account x
is selected. The Account Label identifies the SIP account throughout the
WebUI and on the handset Dialing Line menu.
Display Name Enter the Display Name. The Display Name is the text portion of the caller ID
that is displayed for outgoing calls using account x. If the Account Label is
blank, the Display Name appears on the handset display when account x is
selected.
User identifier Enter the User identifier supplied by your service provider. The User ID, also
known as the Account ID, is a SIP URI field used for SIP registration.
Note: Do not enter the host name (e.g. “@sipservice.com”). The WebUI auto-
matically adds the default host name.
Authentication name If authentication is enabled on the server, enter the authentication name
(or authentication ID) for authentication with the server.
Authentication password If authentication is enabled on the server, enter the authentication password
for authentication with the server.
Dial Plan Enter the dial plan, with dialing strings separated by a | symbol. See "Dial
Plan" on page 21.
Inter Digit Timeout (secs) Sets how long the handset waits after any “P” (pause) in the dial string or in
the dial plan.
Maximum Number
of Calls
Select the maximum number of concurrent active calls allowed for that ac-
count.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M200 SC Base Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M200 SC Base Station in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info