809886

Snom M200 SC Base Station Manual

18
Zoom out
Zoom in
Previous page
1/120
Next page
18
v1.01
M200SC Administrator and Provisioning Manual Configuration using the Web user interface (WebUI)
Accessing the Web User Interface (WebUI)
1. Ensure that your computer is connected to the same network as the M200SC.
2. Finding the IP address of the M200SC:
a. On a handset, press the MENU key or the key underneath MENU.
b. Press q or p to highlight Status, and then press the MENU key or the key underneath ENTER.
c. With Network highlighted, press the MENU key or the key underneath ENTER. The Network screen
appears.
d. Highlight the IP version in use (IPv4 or IPv6) and then press the MENU key or the key underneath
ENTER.
e. On the IPv4 or IPv6 screen, note the IP address.
3. Open an Internet browser on your computer. Depending on your browser, some of the pages presented
here may look dierent and have dierent controls. Ensure that you are running the latest update of your
preferred browser.
4. Type the M200SC IP address in the browser address bar and press ENTER on your computer keyboard.
5. The browser displays a window asking for your user name and password.
6. For the administrator user name, enter admin. For the password, enter the default password, admin. You
can change the password later on the WebUI Security page, available under Configuration.
NOTE: As a security measure, the WebUI prevents you from logging in for five minutes after four
(or three, depending on the browser’s cache) consecutive failed log-in attempts during a five-
minute period.
7. Click OK. The WebUI appears.
Click topics from the navigation bar along the top of the WebUI, and then click the links along the left to view
individual pages. For your security, the WebUI times out after 10 minutes, so if it is idle for that time, you must
log in again.
Most WebUI configuration pages have a Save button. Click Save to save changes you have made on the page.
During a configuration session, click Save before you move on to the next WebUI page.
The remaining procedures in this section assume that you are already logged into the WebUI.
The settings tables in this section contain settings that appear in the WebUI, along
with their equivalent settings in
the configuration file template. You can use the configuration file template to create custom configuration files.
Configuration files can be hosted on a provisioning server and used for automatically configuring phones. For
more information, see "Provisioning using configuration files" on page 61.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M200 SC Base Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M200 SC Base Station in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info