Manual Snom M200 SC Base Station (page 21 of 120) (English)

809886

Zoom out

Zoom in

1/120

v1.01

M200SC Administrator and Provisioning Manual Conﬁguration using the Web user interface (WebUI)

Feature Synchronization Enables the M200SC to synchronize with Broadworks Application Server.

Changes to features such as DND, Call Forward All, Call Forward No An-

swer, and Call Forward Busy on the server side will also update the set-

tings on the handset menu and WebUI. Similarly, changes made using the

handset or WebUI will update the settings on the server.

DTMF method Select the default DTMF transmission method. You may need to adjust this

if call quality problems are triggering unwanted DTMF tones or you have

problems sending DTMF tones in general.

Unregister after reboot Enables the phone to unregister the account(s) after rebooting-before

the account(s) register again as the phone starts up. If other phones

that share the same account(s) unregister unexpectedly in tandem

with the rebooting M200SC, disable this setting.

Call Rejection Response

Code

Select the response code for call rejection. This code applies to the

following call rejection cases:

◦ User presses Reject for an incoming call (except when Call

Forward Busy is enabled)

◦DND is enabled

◦ Phone rejects a second incoming call with Call Waiting disabled

◦ Phone rejects an anonymous call with Anonymous Call Rejection

enabled

◦Phone rejects call when the maximum number of calls is reached

Dial Plan

The dial plan consists of a series of dialing rules, or strings, that determine whether what the user has dialed is

valid and when the handset should dial the number.

Note: Numbers that are dialed when forwarding a call (when the user manually fowards

a call, or when a

pre-conﬁgured number is dialed for Call Forward All, Call Forward on No Answer, or Call Forward Busy)

always bypass the dial plan.

Dialing rules must consist of the elements deﬁned in the table below.

Element Description

Any dial pad key from 0 to 9, including # and *.

[0-9] Any two numbers separated by a hyphen, where the second number is greater than the ﬁrst.

All numbers within the range or valid, excluding # and *.

x+ An unlimited series of digits.

This represents the playing of a secondary dial tone after the user enters the digit(s) speci-

ﬁed or dials an external call preﬁx before the comma. For instance, “9,xxxxxxx” means the

secondary dial tone is played after the user dials 9 until any new digit is entered. “9,3xxxxxx”

means only when the digit 3 is hit would the secondary dial tone stop playing.

PX This represents a pause of a deﬁned time; X is the pause duration in seconds. For instance,

“P3” would represent pause duration of 3 seconds. When “P” only is used, the pause time is

the same as the Inter Digit Timeout (see "General Account Settings" on page 20).

(0:9) This is a substitution rule where the ﬁrst number is replaced by the second. For example,

“(4:723)xxxx” would replace “46789” with “723-6789”. If the substituted number (the ﬁrst

number) is empty, the second number is added to the number dialed. For example, in “(:1)

xxxxxxxxxx”, the digit 1 is appended to any 10-digit number dialed.

This separator is used to indicate the start of a new pattern. Can be used to add multiple dial-

ing rules to one pattern edit box.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Snom M200 SC Base Station in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Snom M200 SC Base Station Manual

Product: