785804
21
Zoom out
Zoom in
Previous page
1/37
Next page
18
7. Automatic shutdown
If the control unit is not actuated for longer than 20 minutes (factory setting), it is
automatically put into standby mode together with the drive unit (the LEDs go out).
If the drive unit shuts down automatically if it is not used for one hour. As of this
moment, there is no longer an active Bluetooth connection between the control unit and
drive unit.
To put the system back into operation, the drive unit and control unit need to be
switched on again (see chapter 3.1).
8. Pairing
Pairing refers to a process in which Bluetooth devices are connected to each other.
With regard to the SMOOV O10, these devices are the drive unit and the control unit.
Both components are connected by radio and exchange characteristic data in this way.
They therefore recognise each other automatically during every start-up.
The drive unit and the control unit are already paired upon delivery of the SMOOV O10.
In the event that the drive unit or control unit are replaced (within the Alber exchange
pool for example), the components no longer recognise each other and need to be
matched with each other by means of re-pairing as described below.
Fully charge the batteries of the control unit and the drive unit (see chapter 4).
Open the cover [13] on the control unit.
Switch on the drive unit.
Pick up your smartphone, open the SMOOV O10 Mobility app (this is available free of
charge in Google Play Store or the Apple App Store) and connect to the drive unit.
Now go to Settings, then to Drive unit/control unit, and finally to Control unit.
Switch on the control unit.
Press the “Pairing” button in the app and then hold the smartphone’s camera on the
QR Code on the bottom of the drive unit.
Then hold the camera of the smartphone on the QR Code on the control unit below
the USB-C socket.
Pairing now starts automatically. The LED of button [3] flashes blue on the drive
unit; LEDs [b] and [d] flash white.
Use a pointed object, such as a ballpoint pen, to press and hold the Pairing button
[15] on the control unit for approx. 3 seconds. LED [f] flashes blue on the control
unit; LEDs [b] and [d] flash white.
Hold the control unit close to the drive unit.
Pairing is complete as soon as button [3] flashes green on the drive unit.
Close the cover [13] on the control unit.
Your SMOOV O10 is ready for use again if pairing was carried out successfully.
Remove the QR Code from the drive and operating unit and stick them in the user
manual for your safety, so that no unauthorized person can connect another control
unit to the SMOOV O10.
The pairing of the control unit and the drive unit via Bluetooth is unique when delivered
(factory settings), that means that exclusively this paired control unit and no other one
is able to control this drive unit.
If a new control unit is required, both the QR code (unique key for 128 bit AES encryp-
tion) of the SMOOV O10 O10 and the QR of the new control unit must be scanned via the
Mobility App for pairing. The previous control unit is then no longer paired.
No other Bluetooth devices like e.g. headphones can be paired with the SMOOV O10 O10.
The Bluetooth connection is secured via a 128 bit AES key, so no one else can take con-
trol of the system.
f
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smoov One O10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smoov One O10 in the language / languages: English as an attachment in your email.

The manual is 4.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smoov One O10

Smoov One O10 User Manual - German - 36 pages

Smoov One O10 User Manual - Dutch - 36 pages

Smoov One O10 User Manual - French - 36 pages

Smoov One O10 User Manual - Italian - 36 pages

Smoov One O10 User Manual - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info