785804
19
Zoom out
Zoom in
Previous page
1/37
Next page
16
4.2.2 Charging via the drive unit
Switch the drive unit off completely by pressing the On/Off button [3]. This prevents
the drive unit from rolling away if the control unit is actuated unintentionally.
Open the cover [13] on the back of the control unit and open the cover [5] on the
drive unit.
Insert the charger cable supplied with the Alber charger into the charger socket [14]
on the control unit and into the USB-C socket [6] on the drive unit. Both USB-C sock-
ets are intendent to charge the control unit. Any other way of using the USB-C socket
than for charging is not permitted and also technically not possible, as the data lines
are not connected through.
Start the charging process on the drive unit as described in section 4.1.
LED [f] on the control unit flashes green during charging.
LED [f] lights up green continuously if the charging process is complete.
Remove the charger cable; LED [f] goes out
If the charging process is complete and the charger cable has been removed, the SMOOV
O10 can be put back into operation.
If only the two sockets are connected to each other without connecting
the Alber charger to the drive unit, energy is withdrawn from the drive
unit batteries in order to charge the control unit battery.
5. Capacity display of the batteries
In order for you to be informed about the remaining energy in the batteries at all times,
their capacity is continuously displayed in the displays [2] on the drive unit and [12] on
the control unit.
5.1 Capacity of the drive unit battery
The capacity of the drive unit battery is indicated by LEDs [a] to [f] in displays [2] (drive
unit) and [12] (control unit) as follows.
LED [a] flashes: Battery charge status < 10%
LED [a] lights up: Battery charge status > 10%
LEDs [a] and [b] light up: Battery charge status > 20%
LEDs [a], [b] and [c] light up: Battery charge status > 40%
LEDs [a], [b], [c] and [d] light up: Battery charge status > 60%
LEDs [a], [b], [c], [d] and [e] light up: Battery charge status > 80%
5.2 Capacity of the control unit battery
The capacity of the control unit battery is only indicated in display [12] by LED [f].
LED [f] lights up green continuously: Battery capacity > 20-100%
LED [f] lights up yellow continuously: Battery capacity > 10-20%
LED [f] lights up red continuously: Battery capacity > 0-10%
LED [f] lights up red briefly and goes out: Battery capacity < 2%, battery almost empty
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smoov One O10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smoov One O10 in the language / languages: English as an attachment in your email.

The manual is 4.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smoov One O10

Smoov One O10 User Manual - German - 36 pages

Smoov One O10 User Manual - Dutch - 36 pages

Smoov One O10 User Manual - French - 36 pages

Smoov One O10 User Manual - Italian - 36 pages

Smoov One O10 User Manual - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info