785804
17
Zoom out
Zoom in
Previous page
1/37
Next page
14
4. Charging the batteries
4. 1 Charging the drive unit battery
First read the safety instructions for the charger and the charging procedure in chapters
11.3 and 11.4 before charging the SMOOV O10 battery for the first time. With regard to
the charging process, proceed as follows:
Switch the control unit to standby mode (see chapter 3.6.1).
Switch the drive unit system off completely (see chapter 3.6.1).
Plug the power cable [19] of the charger into a socket. The LED [21] lights up blue;
the LED [20] lights up orange.
Insert the charging plug [18] into the charger socket [1]. The correct positioning and
locking of the connection occurs automatically via a magnetic closure.
The start of the charging process is now signalled by two brief acoustic signals.
During the charging process, the displays [2] (drive unit) and [12] (control unit (only if
switched on)) indicate the current charge status of the drive unit battery as follows:
LED [a] flashes: Battery capacity < 10%
LED [a] lights up: Charge status > 10%
LED [b] lights up: Charge status > 20%
LED [c] lights up: Charge status > 40%
LED [d] lights up: Charge status > 60%
LED [e] lights up: Charge status > 80%
If the control unit is switched on, LED [f] continuously indicates the remaining battery
capacity of the control unit.
The battery should always be fully charged. However, the charging process can be inter-
rupted or terminated at any time if necessary.
When the charging process is complete, you must first disconnect the charging plug [18]
from the charger socket [1], then disconnect the power cable [19] of the charger from
the socket.
Attention: The drive unit is switched on after the charging process.
Displays on the charger
The status of the charger is indicated by its LEDs as follows:
LED [21] blue, illuminated Charger is ready for use
LED [20] green, flashing Charging
LED [20] green, illuminated Charging is complete
LED [20] red, illuminated Error
The drive unit is switched on following completion of the charging
process.
Only the Alber charger supplied with the SMOOV O10 is to be used to
charge the drive unit. The use of a charger not supplied by Alber is not
permitted.
Ensure that the charger plug [18] and the charger socket [1] are clean
and that there are no metallic particles. If there are any metallic
particles, remove these with a clean, dry cloth.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smoov One O10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smoov One O10 in the language / languages: English as an attachment in your email.

The manual is 4.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smoov One O10

Smoov One O10 User Manual - German - 36 pages

Smoov One O10 User Manual - Dutch - 36 pages

Smoov One O10 User Manual - French - 36 pages

Smoov One O10 User Manual - Italian - 36 pages

Smoov One O10 User Manual - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info