785804
22
Zoom out
Zoom in
Previous page
1/37
Next page
819
9. Transport
9.1 Drive unit and control unit
The drive unit and the control unit should be removed from the wheelchair and be stored
safely for transport purposes (see the next two chapters in this regard).
Depending on the means of transport, but especially for air transport, the drive unit and
control unit must be removed from the wheelchair and be stored as luggage.
Irrespective of whether the components are attached to the wheelchair or are stored sep-
arately, the control unit must be put in standby mode and the drive unit needs to be
switched off completely for transport in both instances (in this regard, see chapter 3.6).
9.2 Wheelchairs with a rigid frame
Wheelchairs with a rigid frame have a fixed bracket that cannot be removed by the wheel-
chair user.
Transport your wheelchair according to the manufacturer’s specifications.
9.3 Wheelchairs with a folding frame
If the wheelchair has a folding frame, the adapter axle [22] first needs to be removed
before the wheelchair can be folded.
Push the adapter axle together at its ends using the handles [23].
Remove the adapter axle from the wheelchair.
In order to be able to operate the wheelchair with the SMOOV O10 again after transport,
both wheels must first be attached to the wheelchair followed by the adapter axle [22].
Slide one of the two handles [23] on the adapter axle [22] over the stub axle of one
of the wheels attached to the wheelchair.
Slide the second handle [23] over the red marking on the adapter axle [22] and position
the adapter axle above the stub axle of the second wheel attached to the wheelchair.
Allow the handle [23] to glide gently over the stub axle of the second wheel.
The adapter axle is now connected to the wheelchair and the SMOOV O10 drive unit
can be inserted.
After attaching the adapter axle [22], check that it is securely held in
place.
In addition, the red marking [27] must no longer be visible.
If the red marking [27] is visible, the SMOOV O10 is no longer allowed to
be put into operation. Contact your specialist dealer to have the adapter
axle [22] readjusted to your wheelchair. It may also be necessary to pro-
cure a new adapter axle.
Check that the adapter axle [22] is in the correct position on the stub
axles of the wheelchair at regular intervals. It must never be possible to
slide the handles [23] over the retaining balls [24]!
22
23
23
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smoov One O10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smoov One O10 in the language / languages: English as an attachment in your email.

The manual is 4.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smoov One O10

Smoov One O10 User Manual - German - 36 pages

Smoov One O10 User Manual - Dutch - 36 pages

Smoov One O10 User Manual - French - 36 pages

Smoov One O10 User Manual - Italian - 36 pages

Smoov One O10 User Manual - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info