490958

Skytec Polaris DMX LED Flower 162 Manual

4
Zoom out
Zoom in
Previous page
1/22
Next page
151.551
Polaris
DMX LED Flower 162
Instruction Manual
Gebruiksaanwijzing
Mode d’Emploi
Gebrauchsanleitung
2
Please read this user manual before using this product.
Warning:
- Read the manual prior to using the unit.
- Keep the manual for further reference.
- Keep the packaging so that you can
transport the unit in its original
packaging in order to avoid damage.
- The SkyTec light effect contains a high
light intensity LED. Do not look into the
LED’s. This might damage seriously your eyes.
- For indoor use only.
- Don’t cover any ventilation opening.
- Do not shake the device and avoid brute force when installing or operating the device.
- During installation, nobody should stand beneath the mounting area.
- Installation point/area must be enough for loading 10 times the device’s weight.
- The light effect must be placed at least 50 cm away from inflammable materials such as curtains, books,
etc. Make sure that the housing cannot be touched by accident.
- Prior to the first use, have the unit checked by a qualified person.
- The unit contains voltage carrying parts. DO NOT open the light effect.
- Unplug the unit from the mains prior to repairs, maintenance and replacement of the lamp.
- Never plug or unplug the unit with wet hands.
- Disconnect the unit from the mains prior to replacing the fuse.
- If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.
- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains
outlet.
- Repairs has to be carried out by a qualified technician.
- Only connect this unit to an earthed mains outlet of 230Vac/50Hz~.
- Always unplug the unit during a thunderstorm or when it is not in use.
- If the unit has not been used for a longer period of time, condensation can occur inside the housing.
Please let the unit reach room temperature prior to use.
- When you unplug the unit from the mains always pull the plug, never the lead.
- In order to prevent dropping of the unit, a safety fastening needs to be installed. This can be a solid
chain, a steel cable, etc. which has to be fastened separately from the mounting bracket.
- Use only certificated safety cables which can hold 12 times the weight of the device.
- The maximum drop distance must never exceed 20cm.
- The supplied bracket is the main fixing and must be used to solidly mount the light effect.
- In order to avoid accidents in public premises, the local legal requirements and safety
regulations/warnings must be fulfilled.
- Keep out of the reach of children.
- Never leave this device running unattended.
- The operator has to make sure that safery relating and machine technical installations are approved by
a skilled person regular.
3
General
Thank you for choosing Polaris. This products meets the requirement of the European guidelines (CE).
The polaris are designed to produce effect lighting for use in light show systems in bars, clubs, schools, on
stages etc.
Features
- 4 Operation modes:
Automatic running, DMX, Sound Active, Master/Slave
- Sound active from built-in programs
- Strobe function
- Long life LED light source - no light bulbs to replace
- Razor sharp beams, Colors don’t fade in time
- Produce bright multi-colored beams of light
- Big optical lens for maximum light output
- Very little heat production
- Very low power consumption
- Lightweight
Operation instruction:
The Polaris has 4 operations modes. It can be operated automatic, sound active, master/slave or DMX.
The mode can be selected by the dipswitches on the back side of the unit.
4
Automatic / Sound active mode:
Set DIP switch 10 to ON position DIP switch 9 to OFF. Program and sound mode can be selected via DIP
switches 1 to 8
.
Function Instruction
8 Automatic mode
7 Sound mode
6 All shining
5 Twinkling mode 1
4 Twinkling mode 2
3 Twinkling mode 3
2 Auto speed 2(quick)
1 Auto speed 1(slow)
Slave mode:
Set DIP switch 10 & 9 to ON. The master unit will control now all the slave units. Select on the master
device the program mode Automatic / Sound active mode this device then works as master device and
controls all other slave devices which are to be connected to the master device via a 2 core screened
cable. Connect the out XLR connector with the IN connector of the next device.
DMX mode:
Set DIP switch 10 to OFF position and control the DMX receiving address with dip switches 1-9 and you’re
all set-up to start the DMX receiving mode.
(Note: 1 = On, 0 = Off)
DIP Switches DMX
Address
9 8 7 6 5 4 3 2 1
01 0 0 0 0 0 0 0 0 1
02 0 0 0 0 0 0 0 1 0
03 0 0 0 0 0 0 0 1 1
04 0 0 0 0 0 1 1 0 0
… .. .. .. .. .. .. .. .. ..
509 1 1 1 1 1 1 1 0 1
5
DMX-protocol
DMX channel DMX scale Detail function
0 24 RGB color control
25 49 Mode 1
50 74 Mode 2
75 99 Mode 3
100 124 Mode 4
125 149 Mode 5
150 174 Mode 6
175 199 Mode 7
200 224 Automatic mode
CH 1
225 255 Sound control mode
CH2 0 255 Red luminance weak strong
CH3 0 255 Green luminance weak strong
CH4 0 255 Blue luminance weak strong
CH5 0 255 Strobe speed slow quick
RGB color control
(CH1 0 - 24)
CH6 0 255 luminance strong weak
CH 2-4,6 No changing Mode 1-8
(CH1 25 - 224)
CH5 0 255 Speed quick slow
Sound control
(CH1 225 - 255)
CH2-6 No changing
DMX XLR-connection
Connection between controller and the LED light effect and between another DMX light effect must be
made with 2 core screened cable, with each core having at least a 0.5mm diameter. The XLR's are
connected as shown in the table above. Note, care should be taken to ensure that none of the connections
touch the body of the plug or each other. The body of the plug is not connected in any way. The Polaris
accepts digital control signals in standard DMX512 (1990) format. Connect the controller’s output to the
first fixture’s input, and connect the first fixture’s output to the second fixture’s input. The rest may be
deduced by analogy. Eventually connect the last fixture’s output to a DMX terminator.
The Polaris LED effect uses 3-pin XLR plug / socket. If your controller uses 5-pin XLR plug / socket, you
should use a conversion cable from 5-pin to 3-pin as shown bellow.
5 PIN PLUG
Pin 1: GND (Screen)
Pin 2: Signal (data -)
Pin 3: Signal (data +)
Pin 4: N/C
Pin 5: N/C
3 PIN SOCKET
Pin 1: GND (Screen)
Pin 2: Signal (data -)
Pin 3: Signal (data +)
5 PIN SOCKET
Pin 1: GND (Screen)
Pin 2: Signal (data -)
Pin 3: Signal (data +)
Pin 4: N/C
Pin 5: N/C
3 PIN PLUG
Pin 1: GND (Screen)
Pin 2: Signal (data -)
Pin 3: Signal (data +)
DMX IN
1
2
3
1
2
3
DMX OUT
DMX 512
PIN FUNCTION
1
2
3
GND
DATA -
DATA +
6
DMX Terminator
At the last fixture in the chain, the DMX output has to be connected with a DMX terminator. This prevents
electrical noise from disturbing and corrupting the DMX control signals. The DMX terminator is simply an
XLR connector with a 120 Ohm resistor connected across pins 2 and 3, which is then plugged into the
output socket on the last projector in the chain. The connections are illustrated below.
Specification:
Power: .................................................................................................230V / 50Hz ~
Power consumption: .......................................................................................... 20W
LEDs:................................................................................60 Red, 36 Green, 66 Blue
DMX Channels: .........................................................................................................6
Weight:...................................................................................................................5kg
Size (LxWxH):..............................................................................335 x 305 x 285mm
Maximum ambient Temperature Ta: ....................................................................45°C
Fuse:.....................................................................................................................F1A
• Specifications and design are subject to change without prior notice.
PIN 3
PIN 2
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any
changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of
accidents or damages caused by inappropriate use or disrespect of the warnings contained in this
manual. SkyTronic cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
7
VEILIGHEIDSVOORSCHRIFTEN :
- Bewaar de verpakking zodat u indien het apparaat defect is, dit in de originele verpakking kunt
opsturen om beschadigingen te voorkomen.
- Voordat het apparaat in werking wordt gesteld, altijd eerst een deskundige raadplegen.
- In het apparaat bevinden zich onder spanning staande onderdelen; open daarom NOOIT dit
apparaat.
- Bij het verwijderen van de stekker uit het stopcontact nooit aan het netsnoer trekken.
- Verwijder of plaats een stekker nooit met natte handen resp. uit en in het stopcontact.
- Indien zowel de stekker en/of netsnoer als snoeringang in het apparaat beschadigd zijn dient dit
door een vakman hersteld te worden.
- Indien het apparaat zo beschadigd is dat inwendige (onder)delen zichtbaar zijn mag de stekker
NOOIT in het stopcontact worden geplaatst én het apparaat NOOIT worden ingeschakeld. Neem
in dit geval contact op met de dealer.
- Reparatie aan het apparaat dient te geschieden door een vakman of een deskundige.
- Sluit het apparaat alléén aan op een 230VAC / 50Hz geaard stopcontact, verbonden met een
10-16A meterkastgroep.
- Toestel niet opstellen in de buurt van warmte bronnen zoals radiatoren etc. en niet op een
vibrerende ondergrond plaatsen. Dek ventilatie-openingen nooit af.
- Bij onweer altijd de stekker uit het stopcontact halen, zo ook wanneer het apparaat voor een
langere tijd niet gebruikt wordt.
- Als u het apparaat lang niet gebruikt heeft en het weer wil gebruiken kan er condens ontstaan; laat
het apparaat eerst op kamertemperatuur komen alvorens het weer in werking te stellen ; apparaat
nooit in vochtige ruimten en buiten gebruiken.
- Om ongevallen in bedrijven te voorkomen moét rekening worden gehouden met de daarvoor
geldende richtlijnen en moeten de aanwijzingen/waarschuwingen worden gevolgd.
- Zorg voor een extra veiligheidsketting als het apparaat op hoogte wordt gehangen. Ga nooit onder
het apparaat staan bij ophanging. Monteer het product minimaal 50 cm van brandbare objecten.
- Dit apparaat bezit een high light intensity LED; kijk nooit in de LED om oogbeschadigingen te
voorkomen.
- Het apparaat buiten bereik van kinderen houden.
- Gebruik geen schoonmaakspray om de schakelaars te reinigen. Restanten van deze spray zorgen
ervoor dat smeer en stof ophopen. Raadpleeg bij storing te allen tijde een deskundige.
- Zorg dat uw handen schoon zijn tijdens het gebruik.
- Gebruik geen overmatige kracht bij het bedienen van het apparaat.
- Tracht het apparaat niet schoon te maken met chemische oplossingen. Dit kan de lak
beschadigen. Gebruik een droge doek om schoon te maken.
Lees deze handleiding eerst door alvorens het product te gebruiken. Volg de instructies op anders zou
de garantie wel eens kunnen vervallen. Neem ook altijd alle veiligheids maatregelen om brand en/of
een electrische schok te voorkomen.
Tevens is het ook raadzaam om reparaties / modificaties e.d. over te laten aan gekwalificeerd
personeel om een electrische schok te voorkomen.
Bewaar deze handleidin
g
ook voor toekomsti
g
g
ebruik.
10
DMX channel DMX scale Detail function
0 24 RGB color control
25 49 Mode 1
50 74 Mode 2
75 99 Mode 3
100
124
Mode 4
125 149 Mode 5
150 174 Mode 6
175 199 Mode 7
200 224 Automatic mode
CH 1
225 255 Sound control mode
CH2 0 255 Red luminance weak strong
CH3 0 255 Green luminance weak
strong
CH4 0 255 Blue luminance weak
strong
CH5 0 255 Strobe speed slow
quick
RGB color control
(CH1 0 - 24)
CH6 0 255 luminance strong
weak
CH 2-4,6 No changing Mode 1-8
(CH1 25 - 224)
CH5 0 255 Speed quick slow
Sound control
(CH1 225 - 255)
CH2-6 No changing
DMX XLR-AANSLUITING
De 2 draden van de afgeschermde kabel die gebruikt wordt dienen een minimale diameter van 0.5mmø
te hebben. De XLR-aansluitingen moeten zoals in de figuur is weergegeven worden uitgevoerd. De
Polaris werkt volgens het DMX512 protocol.
Indien een 5p XLR plug dient te worden gebruikt moet deze volgens bovenstaande figuur worden
aangesloten.
DMX IN
1
2
3
1
2
3
DMX OUT
DMX 512
PIN FUNCTION
1
2
3
GND
DATA -
DATA +
5 PIN PLUG
Pin 1: GND (Screen)
Pin 2: Signal (data -)
Pin 3: Signal (data +)
Pin 4: N/C
Pin 5: N/C
3 PIN SOCKET
Pin 1: GND (Screen)
Pin 2: Signal (data -)
Pin 3: Signal (data +)
5 PIN SOCKET
Pin 1: GND (Screen)
Pin 2: Signal (data -)
Pin 3: Signal (data +)
Pin 4: N/C
Pin 5: N/C
3 PIN PLUG
Pin 1: GND (Screen)
Pin 2: Signal (data -)
Pin 3: Signal (data +)
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skytec Polaris DMX LED Flower 162 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skytec Polaris DMX LED Flower 162 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info