490958

Skytec Polaris DMX LED Flower 162 Manual

6
Zoom out
Zoom in
Previous page
1/22
Next page
6
DMX Terminator
At the last fixture in the chain, the DMX output has to be connected with a DMX terminator. This prevents
electrical noise from disturbing and corrupting the DMX control signals. The DMX terminator is simply an
XLR connector with a 120 Ohm resistor connected across pins 2 and 3, which is then plugged into the
output socket on the last projector in the chain. The connections are illustrated below.
Specification:
Power: .................................................................................................230V / 50Hz ~
Power consumption: .......................................................................................... 20W
LEDs:................................................................................60 Red, 36 Green, 66 Blue
DMX Channels: .........................................................................................................6
Weight:...................................................................................................................5kg
Size (LxWxH):..............................................................................335 x 305 x 285mm
Maximum ambient Temperature Ta: ....................................................................45°C
Fuse:.....................................................................................................................F1A
• Specifications and design are subject to change without prior notice.
PIN 3
PIN 2
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any
changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of
accidents or damages caused by inappropriate use or disrespect of the warnings contained in this
manual. SkyTronic cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skytec Polaris DMX LED Flower 162 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skytec Polaris DMX LED Flower 162 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info