758596
7
Zoom out
Zoom in
Previous page
1/160
Next page
7
a) Maintainafirmgriponthepowertoolandposition
yourbodyandarmtoallowyoutoresistkickback
forces.Alwaysuseauxiliaryhandle,ifprovided,for
maximumcontroloverkickbackortorquereaction
duringstart-up.Theoperatorcancontroltorquereactions
orkickbackforces,ifproperprecautionsaretaken.
b) Neverplaceyourhandneartherotatingaccessory.
Theaccessorymaykickbackoveryourhand.
c) Donotpositionyourbodyintheareawherepower
toolwillmoveifkickbackoccurs.Kickback will propel
the tool in the direction opposite to the wheel’s
movementatthepointofsnagging.
d) Usespecialcarewhenworkingcorners,sharp
edgesetc.Avoidbouncingandsnaggingthe
accessory.Corners,sharpedgesorbouncinghavea
tendency to snag the rotating accessory and cause loss
ofcontrolorkickback.
e) Donotattachasawchainwoodcarvingbladeor
toothedsawblade.Suchbladescreatefrequent
kickbackandlossofcontrol.
3)SAFETYWARNINGSSPECIFICFORGRINDINGAND
CUTTING OFF OPERATIONS
a) Useonlywheeltypesthatarerecommendedfor
yourpowertoolandthespecificguarddesignedfor
theselectedwheel.Wheelsforwhichthepowertool
wasnotdesignedcannotbeadequatelyguardedand
areunsafe.
b) Theguardmustbesecurelyattachedtothepower
toolandpositionedformaximumsafety,sotheleast
amountofwheelisexposedtowardstheoperator.
Theguardhelpstoprotecttheoperatorfrombroken
wheelfragmentsandaccidentalcontactwiththewheel.
c) Wheelsmustbeusedonlyforrecommended
applications.For example: Do not grind with the side
ofacut-offwheel.Abrasivecut-offwheelsareintended
forperipheralgrinding;sideforcesappliedtothese
wheels may cause them to shatter.
d) Alwaysuseundamagedwheelflangesthatareof
correctsizeandshapeforyourselectedwheel.
Proper wheel flanges support the wheel thus reducing
thepossibilityofwheelbreakage.Flangesforcut-off
wheelsmaybedifferentfromgrindingwheelanges.
e) Donotuseworndownwheelsfromlargerpowertools.
Awheelintendedforalargerpowertoolisnotsuitablefor
thehigherspeedofasmallertoolandmayburst.
4)ADDITIONALSAFETYWARNINGSSPECIFICFOR
CUTTING OFF OPERATIONS
a) Donot“jam”thecut-offwheelorapplyexcessive
pressure.Donotattempttomakeanexcessivedepth
ofcut.Overstressingthewheelincreasestheloading
andsusceptibilitytotwistingorbindingofthewheelin
thecutandthepossibilityofkickbackorwheelbreakage.
b) Donotpositionyourbodyinlinewithandbehindthe
rotatingwheel.Whenthewheel,atthepointof
operation,ismovingawayfromyourbody,thepossible
kickback may propel the spinning wheel and the power
tool directly at you.
c) Whenthewheelisbindingorwheninterruptingacut
foranyreason,switchoffthepowertoolandhold
thepowertoolmotionlessuntilthewheelcomesto
acompletestop.Neverattempttoremovethe
cut-offwheelfromthecutwhilethewheelisin
motion,otherwisekickbackmayoccur.Investigate
andtakecorrectiveactiontoeliminatethecauseof
wheel binding.
d) Donotrestartthecuttingoperationintheworkpiece.
Letthewheelreachfullspeedandcarefullyre-enter
thecut.Thewheelmaybind,walkuporkickbackifthe
power tool is restarted in the workpiece.
e) Supportpanelsoranyoversizedworkpieceto
minimizetheriskofwheelpinchingandkickback.
Large workpieces tend to sag under their own weight.
Supports must be placed under the workpiece near the
lineofcutandneartheedgeoftheworkpieceonboth
sidesofthewheel.
f) Useextracautionwhenmakinga“pocketcut”into
existingwallsorotherblindareas.The protruding
wheelmaycutgasorwaterpipes,electricalwiringor
objects that can cause kickback.
5)SAFETYWARNINGSSPECIFICFORSANDING
OPERATIONS
a) Whensanding,donotuseexcessivelyoversized
sandingdiscpaper.Followthemanufacturers’
recommendationswhenselectingsandingpaper.
Larger sanding paper extending beyond the sanding
pad presents a laceration hazard and may cause
snagging,tearingofthedisc,orkickback.
6)SAFETYWARNINGSSPECIFICFORWIRE
BRUSHING OPERATIONS
a) Beawarethatwirebristlesarethrownbythebrush
evenduringordinaryoperation.Donotoverstress
thewiresbyapplyingexcessiveloadtothebrush.
The wire bristles can easily penetrate light clothing
and/ or skin.
b) Iftheuseofaguardisrecommendedforwire
brushing,donotallowanyinterferenceofthewire
wheelorbrushwiththeguard.Wire wheel or brush
may expand in diameter due to work load and
centrifugalforces.
GENERAL
• Onlyusetheangeswhicharesuppliedwiththistool
• Thistoolshouldnotbeusedbypeopleundertheageof
16 years
• Thistoolisnotsuitableforwetgrinding/cutting
• Alwaysdisconnectplugfrompowersourcebefore
makinganyadjustmentorchanginganyaccessory
ACCESSORIES
• SKILcanassureawlessfunctioningofthetoolonly
when original accessories are used
• Formounting/usingnon-SKILaccessoriesobservethe
instructionsofthemanufacturerconcerned
• Neverusereducorsoradaptorstotlarge-hole
grinding/cutting discs
• Neveruseaccessorieswitha“blind”threadedhole
smaller than M14 x 21 mm
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 9425 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 9425 in the language / languages: All languages as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info