758357

Skil 3335-01 Manual

12
Zoom out
Zoom in
Previous page
1/52
Next page
12.
Assembly and adjustments
Sawdust collection port (Fig. 10 and 11)
This scroll saw allows a hose or vacuum accessory (not
provided) to be connected to the dust chute (1).
If excessive sawdust buildup occurs inside the base,
use a wet/dry vacuum cleaner or manually remove saw-
dust by removing the screws (2) and metal plate on the
left side of the saw. Reattach the metal plate and screws
before starting the saw. This will keep your saw cutting
efficiently.
Blade selection (Fig. 12)
This scroll saw accepts both both pin-end and plain-end
5" length blades, with a wide variety of blade thickness-
es and widths. The type of material and intricacies of
cutting operations will determine the number of teeth per
inch. Always select the narrowest blades for intricate
(tight radius and curves) curve cutting and the widest
blades for straight and large curve cutting operations.
The following table represents suggestions for various
materials. When purchasing blades, refer to the back of
the package for best use of blades on various materials.
Use this table as an example, but practice and your own
personal preference will be the best selection method.
When choosing a blade, use very fine, narrow blades to
scroll cut in thin wood 1/4" thick or less.
Use wider blades for thicker materials but this will
reduce the ability to cut tight curves.
Note: Thinner blades will have more possibilities for
blade deflection when cutting angles are not perpendic-
ular to the table.
FIG. 10
1
2
FIG. 11
10 - 15 15 - 28 30 - 48
FIG. 12
Teeth/ Blade Blade Blade/
Inch Width Thickness SPM Material Cut
TPI inch inch
Medium turns on
10-15 0.110 0.018 500-1200 1/4" to 1-3/4" wood,
soft metal, hardwood
Small turns on 1/8"
15-28 0.055-0.110 0.010-0.018 800-1700 to 1-1/2" wood, soft
metal, hardwood
Non-ferrous
30-48 0.024-0.041 0.012-0.019 Varies metals / hardwoods
using very slow speeds
SM 2610957121 05-08 6/5/08 7:35 AM Page 12
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 3335-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 3335-01 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info