Manual Skil 3335-01 (page 11 of 52) (English, French, Spanish)

758357

Zoom out

Zoom in

1/52

11.

Assembly and adjustments

Bench mounting the saw

Before operating the saw, it must be firmly mounted to a

workbench or another rigid frame.

Use the base of the saw to mark and pre-drill the mount-

ing holes If the saw is to be used in one location, per-

manently secure it to the work surface using wood

screws if mounting to wood. Use bolts, washers, and

nuts if mounting into metal.

To reduce noise and vibration, install a soft foam pad

(not supplied) between the scroll saw and the work-

bench.

To reduce the risk of injury:

•When carrying the saw, hold it close to your body to

avoid injury to your back. Bend your knees when lifting

the saw.

•Carry the saw by the base. Do not carry the saw by the

power cord.

•Secure the saw in a position where people cannot

stand, sit, or walk behind it. Debris thrown from the saw

could injure people standing, sitting, or walking behind

it.

•Secure the saw on a firm, level surface where the saw

cannot rock and there is adequate room for handling

and properly supporting the workpiece.

Blade guard foot adjustment (Fig. 7 and 8)

When cutting at angles, the blade guard foot should be

adjusted so it is parallel to the table and rests flat

abovethe workpiece.

1. To adjust, loosen the screw (2),tilt the foot (1) so it is

parallel to the table, and tighten the screw.

2. Loosen the height adjustment knob (3) to raise or

lower the foot until it just rests on top of the workpiece.

Tighten the knob.

No assembly required. Prior to making adjustments you

may want to mount the scroll saw on a stable surface.

See Bench mounting the saw.

Adjusting the dust blower (Fig. 9)

For best results, the dust blower tube (4) should be

adjusted to direct air at both the blade and the work-

piece.

FIG. 7

FIG. 8

FIG. 9

WARNING

SM 2610957121 05-08 6/5/08 7:35 AM Page 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Skil 3335-01 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Skil 3335-01 Manual

Product: