758357

Skil 3335-01 Manual

10
Zoom out
Zoom in
Previous page
1/52
Next page
10.
Assembly and adjustments
Disconnect the plug from the power
source before making any assembly,
adjustments or changing accessories. Such preven-
tive safety measures reduce the risk of starting the tool
accidentally.
Assembly instructions
No assembly required. Prior to making adjustments you
may want to mount the scroll saw on a stable surface.
See Bench mounting the saw.
Align the bevel indicator (Fig. 3–6)
The bevel indicator has been factory adjusted. It should
be rechecked prior to use for best operation.
1. Remove the blade guard foot (1) using the hex key (2)
to loosen the screw.
2. Loosen the table bevel lock knob (3) and move the
table until it is approximately at a right angle to the
blade.
3. Loosen the locking nut (5) on the table adjusting screw
(6) under the table by turning it counterclockwise.
Lower the table adjusting screw by turning it clock-
wise.
4. Use a combination square (7) to set the table exactly
90°to the blade (8).Ifthere is space between the
square and blade, adjust the table angle until the
space is closed.
5. Lock the table bevel lock knob under the table (3) to
prevent movement.
6. Tighten the adjusting screw under the table until the
tip of the screw touches the table. Tighten the lock nut.
7. Loosen the screw (4) holding the bevel scale pointer
and position pointer to 0°. Tighten the screw.
8. Attach the blade guard foot (1) using the hex key (2),
so that the foot rests flat against the table. Tighten the
screw.
Note: Avoid setting the edge of the table against the top
of the motor, which could cause noise when the saw is
running.
FIG. 3
2
FIG. 4
1
2
FIG. 5
FIG. 6
1
4
3
6
5
7
8
WARNING
!
SM 2610957121 05-08 6/5/08 7:35 AM Page 10
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 3335-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 3335-01 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info