480089
9
Zoom out
Zoom in
Previous page
1/96
Next page
9
MAINTENANCE / SERVICE
This tool is not intended for professional use
Maintain the tool with care and keep it clean
- always ensure that the ventilation openings are kept
clear of debris
! disconnect the plug before cleaning
Regularly check for defects such as loose, dislodged or
damaged
blade, loose xings, and worn or damaged components
Have worn or damaged parts replaced for safety reasons
Avoid bending safety lock N ) which may cause
disfunctioning of the tool
Always switch o the tool, allow the cutting blade to stop,
disconnect the plug and allow the tool to cool down
before inspecting, adjusting, servicing, and/or storing
the tool
Store the tool indoors in a dry place
When servicing the shredding unit be aware that, even
though the motor will not start due to the safety-lock
feature of the guard, the shredding unit can still be moved
by hand
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skileurope.com)
ENVIRONMENT
Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2002/96/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol @ will remind you of this when the need for
disposing occurs
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in conformity with the following standards or
standardized documents: EN 60335, EN 50434,
EN 61000, EN 55014 in accordance with the provisions
of the directives 2006/95/EC, 2004/108/EC,
2006/42/EC, 2000/14/EC
Technical file at: SKIL Europe BV (PT-SEU/PJE),
4825 BD Breda, NL
ÊÆÇιÆ¼½ÊÄÇÇÌ
Á»½ʽËÁ¼½ÆÌ
ȽʹÌÁÇÆËŵÆ¿Áƽ½ÊÁÆ¿
ÍÊÇȽƓˁ˅ʿ˂ʽ¼¹Ɠ
¹ÆÊÇÅŽĽÆ
ÈÈÊÇιÄ¹Æ¹¿½Ê
07.04.2011
Measured in accordance with 2000/14/EC (EN/ISO
3744) the guaranteed sound power level LWA is lower
than 113 dB(A) (conformity assessment procedure
according to Annex V)
Notied body : KEMA, Arnhem, NL
Notied body identication number : 0344
Broyeur 0770
INTRODUCTION
Cet outil n’est conçu pour un usage professionnel
Cet outil a pour objectif de couper les déchets de bois et
de bres pour le compostage
Vériez que le conditionnement contient toutes les
pièces présentées dans le schéma 2
Lorsque des pièces manquent ou sont endommagées,
veuillez contacter votre distributeur
Lisez attentivement ce manuel d’instruction avant
d’utiliser l’outil et conservez-le pour pouvoir vous y référer
ultérieurement 3
Prêtez attention aux consignes de sécurité et aux
avertissements; ne pas suivre ces instructions peut
entraîner des graves blessures
SPECIFICATIONS TECHNIQUES 1
) Le mode de service S6 (P40 = 40%) désigne un prol de
charge supposant une charge de 4 min et une marche à
vide de 6 min (pour une utilisation dans la pratique, un
service permanent est possible)
ELEMENTS DE L’OUTIL 2
A Clé (2)
B Bac récolteur
C Sortie
D Support de sonde
E Interrupteur marche/arrêt
F Bouton de protection
G Bouton de redémarrage
H Ouverture d’alimentation
J Fentes de ventilation
K Sonde
L Clé hexagonale
M Plaque métallique
N Blocage de sécurité
SECURITE
INSTRUCTIONS SPECIFIQUES DE SECURITE
RELATIVES AUX BROYEURS
EXPLICATION DES SYMBOLES SUR L’OUTIL
3 Veuillez lire le mode d’emploi avant d’utiliser l’outil
4 Arrêtez et débranchez la fiche avant tout nettoyage/
toute maintenance ou si le câble (la rallonge) est
endommagé(e) ou entremêlé(e)
5 DANGER Lames rotatives; tenez les mains à l’écart des
ouvertures lorsque l’outil fonctionne
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0770 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info