797781
13
Zoom out
Zoom in
Previous page
1/164
Next page
13
full capacity of the battery, completely charge the battery
in the battery charger before using your power tool for the

Only use the following batteries and chargers with
this tool
-SKIL battery: BR1*41****
-SKIL charger: CR1*41****
Do not use the battery when damaged; it should be
replaced
Do not disassemble the battery
Do not expose tool/battery to rain
Permitted ambient temperature (tool/charger/battery):
-when charging 4...40°C
-during operation –20...+50°C
-during storage –20...+50°C
EXPLANATION OF SYMBOLS ON TOOL/BATTERY
3 Read the instruction manual before use
4
burn battery for any reason
5 Store tool/charger/battery in locations where temperature
will not exceed 50°C
6 
debris
7 Wear protective glasses and hearing protection
8 Do not expose tool to rain
9 Do not dispose of electric tools and batteries together
with household waste material
p Disconnect battery before maintenance
a The distance between the machine and bystanders shall
be at least 15 m
s Do not use metal blades
USE
Assembly instructions
-w
-mount the guide handle C between the hinge D and the
sleeve J as illustrated e
-guide handle C can be adjusted by loosening/
tightening knob H
-mount cutting guard G as illustrated with 2 screws r
! never use the tool without cutting guard G
Charging battery
! read the safety warnings and instructions
provided with the charger
Removing/installing the battery 2
! NEVER remove the battery pack at a high location.
t
-
cannot be locked) and then pulling trigger switch L
-
! 
continues to rotate for a few seconds
-allow the cutting line to stop rotating before switching
on again
! 
Battery level indicator q
-press the battery level indicator button M to show the
current battery level qa
! when the lowest level of the battery indicator

qb, the battery is nearly depleted.
Battery protection

control of the machine.
Do not operate the machine on excessively steep
slopes. This reduces the risk of loss of control, slipping
and falling which may result in personal injury.
When working on slopes, always be sure of your
footing, always work across the face of slopes,
never up or down and exercise extreme caution
when changing direction. This reduces the risk of
loss of control, slipping and falling which may result in
personal injury.
Keep the supply cord away from the cutter, line or
blade. A damaged supply cord may result in electric

Keep all parts of the body away from the cutter,
line or blade when the machine is operating. Before
you start the machine, make sure the cutter, line
or blade is not contacting anything. A moment of
inattention while operating the machine may result in
injury to yourself or others.
Do not operate the machine above waist height.
This helps prevent unintended cutter or blade contact
and enables better control of the machine in unexpected
situations.
When cutting brush or saplings that are under
tension, be alert for spring back. When the tension

strike the operator and/or throw the machine out of
control.
Use extreme caution when cutting brush and
saplings. The slender material may catch the blade and

Maintain control of the machine and do not touch
cutters, lines or blades and other hazardous moving
parts while they are still in motion. This reduces the
risk of injury from moving parts.
When clearing jammed material or servicing the

and the power cord is disconnected. Unexpected
starting of the machine while clearing jammed material or
servicing may result in serious personal injury.

and away from your body. Proper handling of the
machine will reduce the likelihood of accidental contact
with a moving cutter, line or blade.
Only use replacement cutters, lines, cutting heads
Incorrect
replacement parts may increase the risk of breakage and
injury.
 If you strike a foreign object with
the trimmer or it becomes entangled, stop the machine
immediately, check for damage and have any damage
repaired before further operation is attempted. Do not
operate with a broken guard or spool.
If the equipment should start to vibrate abnormally,
stop the motor and check immediately for the cause.
Vibration is generally a warning of trouble. A loose head

may result in serious or fatal injury. Make sure that the


Never use a trimmer with a loose cutting attachment.
SAVE THESE INSTRUCTIONS!
BATTERIES
The battery supplied is partially charged (to ensure
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0280 in the language / languages: All languages as an attachment in your email.

The manual is 7.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info