797781
12
Zoom out
Zoom in
Previous page
1/164
Next page
12
charge the battery pack or machine outside the

Charging improperly or at temperatures outside the


 SERVICE
a) 
person using only identical replacement parts. This
will ensure that the safety of the machine is maintained.
b) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
LINE TRIMMER SAFETY WARNINGS
Do not use the machine in bad weather conditions,
especially when there is a risk of lightning. This
decreases the risk of being struck by lightning.
Thoroughly inspect the area for wildlife where the
machine is to be used. Wildlife may be injured by the
machine during operation.
Thoroughly inspect the area where the machine
is to be used and remove all stones, sticks, wires,
bones, and other foreign objects. Thrown objects can
cause personal injury.
Before using the machine, always visually inspect to
see that the cutter and the cutter assembly are not
damaged. Damaged parts increase the risk of injury.
Before use, check the supply cord and any
extension cord for signs of damage or aging. Do not
use the machine if the cord is damaged or worn.
If the cord is damaged or worn during use, switch

disconnecting it from the supply. A damaged supply

and/or serious injury.
Follow instructions for changing accessories.
Improperly tightened blade securing nuts or bolts
may either damage the blade or result in it becoming
detached.
Wear eye, ear, head and hand protection. Adequate

debris or accidental contact with the cutting line or blade.

and protective footwear. Do not operate the machine
when barefoot or wearing open sandals. This
reduces the chance of injury to the feet from contact with
the moving cutters or lines.
While operating the machine, always wear long
trousers. Exposed skin increases the likelihood of injury
from thrown objects.
Keep bystanders away while operating the machine.
Thrown debris can result in serious personal injury.
Always use two hands when operating the machine.
Holding the machine with both hands will avoid loss of
control.
Hold the machine by insulated gripping surfaces
only, because the cutting line or blade may contact
hidden wiring or its own cord. Cutting line or blades
contacting a “live” wire may make exposed metal parts of
the machine “live” and could give the operator an electric
shock.
Always keep proper footing and operate the
machine only when standing on the ground. Slippery
or unstable surfaces may cause a loss of balance or
can cause severe injury within a fraction of a second.
 MACHINE USE AND CARE
a) Do not force the machine. Use the correct machine
for your application. The correct machine will do the job
better and safer at the rate for which it was designed.
b) Do not use the machine if the switch does not turn it
Any machine that cannot be controlled with
the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from the
machine before making any adjustments, changing
accessories, or storing machines. Such preventive
safety measures reduce the risk of starting the machine
accidentally.
d) Store idle machines out of the reach of children and
do not allow persons unfamiliar with the machine or
these instructions to operate the machine. Machines
are dangerous in the hands of untrained users.
e) Maintain machines and accessories. Check for
misalignment or binding of moving parts, breakage

machine’s operation. If damaged, have the machine
repaired before use. Many accidents are caused by
poorly maintained machines.
f) Keep cutting machines sharp and clean. Properly
maintained cutting machines with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the machine, accessories and machine bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. 
from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the machine in unexpected situations.
 BATTERY MACHINE USE AND CARE
a) 
manufacturer. A charger that is suitable for one type

another battery pack.
b) 
battery packs. Use of any other battery packs may

c) When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns

d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact

contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
e) Do not use a battery pack or machine that is


explosion or risk of injury.
f) 
excessive temperature. 
above 130 °C may cause explosion.
g) Follow all charging instructions and do not
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0280 in the language / languages: All languages as an attachment in your email.

The manual is 7.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info