797780
14
Zoom out
Zoom in
Previous page
1/164
Next page
14
full capacity of the battery, completely charge the battery
in the battery charger before using your power machine
for the rst time)
Only use the following batteries and chargers with
this machine
-SKIL battery: BR1*41****
-SKIL charger: CR1*41****
Do not use the battery when damaged; it should be
replaced
Do not disassemble the battery
Do not expose machine/battery to rain
Permitted ambient temperature (machine/charger/
battery):
-when charging 0...+45°C
-during operation –20...+50°C
-during storage –20...+50°C
EXPLANATION OF SYMBOLS ON TOOL
4 Read the instruction manual before use
5 Batteries may explode when disposed of in re, so do not
burn battery for any reason
6 Store tool/charger/battery in locations where temperature
will not exceed 50°C
7 Do not dispose of electric tools and batteries together
with household waste material
8 Beware of sharp blades, after switching o the tool the
blade continues to rotate for a few seconds, switch o
and remove the battery pack from tool before cleaning/
maintenance.
9 
debris (keep bystanders a safe distance away from work
area)
q Wear protective glasses and hearing protection
w Do not expose tool to rain
USE
Charging battery
! read the safety warnings and instructions
provided with the charger
Removing/installing the battery r
Adjusting height of tool handle F t
I = High
II = Medium
III = Low
Adjusting cutting height (25-90mm) G y
-adjust handle G by putting it in slot for desired cutting
height. 1=25 mm, 2=32 mm, 3=40 mm, 4=51 mm,
5=64 mm, 6=77 mm, 7=90 mm
On/o safety switch u
Prevents the tool from being switched on accidentally
-switch on tool by rst pressing safety switch A and then
pulling trigger switch B
-switch o tool by releasing trigger switch B
! 
rotate for a few seconds
Operating instructions
-hold the mower with both hands
-place the mower on the edge of the lawn and mow in a
forward direction
-reverse at the end of each turn, slightly overlapping the
previous cut strip
! only use the mower on dry grass
-keep the mower away from solid objects and plants
and the battery pack is disconnected. Unexpected
operation of the lawnmower may result in serious
personal injury.
ADDITIONAL RULES FOR LAWN MOWER
The user is responsible for accidents or hazards
occurring to other people or their property
Be familiar with the controls and the proper use of the
machine
Before using, always visually inspect to see that the
blades, blade bolts and cutter assembly are not worn
or damaged. Replace worn or damaged blades and
bolts in sets to preserve balance. Replace damaged or
unreadable labels.
Keep all nuts, bolts and screws tight to be sure the
product is in safe working condition.
Check the functioning of the machine before each use
and, in case of a defect, have it repaired immediately by a
qualied person; never open the machine yourself
Never operate the machine with a defective rear guard or
defective grass box
When operating the machine without grass box, ensure
that the rear guard is in closed position (risk of injury
caused by rotating cutting blade)
Always switch o the machine, remove battery pack, and
ensure that all moving parts have come to a complete
standstill
-whenever leaving the machine unattended
-before clearing jammed material
-before checking, cleaning or working on the machine
-after striking a foreign object
-whenever the machine starts vibrating abnormally
Always keep hands and feet away from rotating
parts
Keep away from the discharge opening at all times
Switch on the motor according to instructions and with
feet well away from the cutting blade
Never mow in the direct vicinity of persons (especially
children) and animals
transportation when crossing surfaces other than grass,
and when transporting the product to and from the area
to be used.
Do not tilt the product when switching on the motor,
except if the product has to be tilted for starting. In this
case, do not tilt it more than absolutely necessary and lift
only the part, which is away from the operator.
Be careful during adjustment of the product to prevent
entrapment of the ngers between moving blades and
xed parts of the product.
Always allow the machine to cool down before storing.
When servicing the blades be aware that, even though
the power source is switched o, the blades can still be
moved.
Check for blockage of the cutting blade
To prevent blockage, keep the cutting blade and mower
deck clean. Remove grass clippings, leaves, dirt and any
other accumulated debris before and after each use.
When blockage happens, stop the mower and remove
the battery, then remove any build-up of grass and leaves
on or around the drive shaft and motor fan (do not use
water). Wipe the mower clean with a damp cloth.
Empty the grass bag before storage.
Never use the machine when handle cord is damaged,
have it replaced by a qualied person
BATTERIES
The battery supplied is partially charged (to ensure
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0180 in the language / languages: All languages as an attachment in your email.

The manual is 8.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info