797780
15
Zoom out
Zoom in
Previous page
1/164
Next page
15
-thoroughly clean the shaft area and the underside of
the tool before mounting the cutting blade
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
-send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of the
tool are listed on www.skil.com)
Be aware that damage due to overload or improper
handling of the tool will be excluded from the warranty
(for the SKIL warranty conditions see www.skil.com or
ask your dealer)
TROUBLESHOOTING
The following listing shows problem symptoms, possible
causes and corrective actions (if these do not identify
and correct the problem, contact your dealer or service
station)
! 
and ensure that all moving parts have come to a
complete standstill
Tool does not operate
-empty battery -> charge battery
-telescopic handle problem -> fully extend handle and
lock the levers 2a
-hot battery -> let battery cool down
-cutting blades jammed -> clear jammed material
-grass too high -> increase cutting height and tilt tool
-internal fault -> contact dealer/service station
Tool operates intermittently
-internal wiring defective -> contact dealer/service
station
Tool leaves ragged nish or motor labours
-cutting height cut too low -> increase cutting height
-cutting blade blunt -> replace cutting blade
-underside of tool badly clogged -> clean tool
Cutting blade not rotating
-cutting blade obstructed -> clear obstruction
-blade nut/bolt loose -> tighten blade nut/bolt
Tool vibrates abnormally
-cutting blade damaged -> replace cutting blade
-blade nut/bolt loose -> tighten blade nut/bolt
ENVIRONMENT
Only for EU countries
Do not dispose of electric tools, accessories and
packaging together with household waste material
-in observance of European Directive 2012/19/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
-symbol 7 will remind you of this when the need for
disposing occurs
! prior to disposal protect battery terminals with

Only for UK
Do not dispose of electric tools, accessories and
packaging together with household waste material
-in observance of on Waste Electric and Electronic
Equipment Regulations 2013 (SI 2013/3113), electric
! 
mechanism to the maximum cutting height, then
to a lower cutting height
! adjust your walking pace when mowing long grass
Mulching function i
-for mulching install mulching plug M as shown
Battery level indicator e
-press the battery level indicator button N to show the
current battery level ea
! when the lowest level of the battery indicator

eb, the battery is nearly depleted.
Battery protection
The tool is suddenly being switched o or prevented from
being switched on, when
-the load is too high --> remove load and restart
-the battery is empty --> the 4 levels of the battery
level indicator starts ashing red for 10s; Remove the
battery from the tool and charge the battery ec
-the battery temperature is not within the allowable
 -->4
levels of the battery level indicator keep solid red for
10s; wait until battery has returned within the allowable
operating temperature range ed
! 

damaged
MAINTENANCE / SERVICE
This tool is not intended for professional use
Always switch o the tool, remove battery pack, and
ensure that all moving parts have come to a complete
standstill
Always keep tool clean
Clean the mower after each use with a hand brush and
a soft cloth
! 
sprays)
-remove compacted grass cuttings from the blade area
with a wooden or plastic implement
Storage o
-for saving substantial storage space fold the tool
handle and store the tool as illustrated; empty grass

! ensure that the handle cord is not trapped when
folding/unfolding the tool handle (do not drop the
handle)
-do not place other objects on top of the mower when
stored
Regularly check the grass box for wear or damage
Regularly check for worn or damaged blades and bolts
and have them replaced in sets to preserve balance
Replacing the cutting blade p a
! remove battery from tool and remove grass box
J 2c
! wear protective gloves
-turn the mower upside down
-remove/mount the cutting blade with a torque wrench
and two metal rods as aid as illustrated
-the printed blade side towards outside
! only use replacement cutting blades of the correct
type (SKIL spare part number 2610S01593,
marked CH3707037001)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0180 in the language / languages: All languages as an attachment in your email.

The manual is 8.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info