797780
12
Zoom out
Zoom in
Previous page
1/164
Next page
12
a) Machine plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) machines. Unmodied plugs
and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not operate the lawn mower in rain or wet
conditions. This may increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the machine. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operating a machine outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a machine in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
 PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a machine. Do not
use a machine while you are tired or under the
 A moment
of inattention while operating machines may result in
serious personal injury.
b) Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the switch

source and/or battery pack, picking up or carrying
the machine. Carrying machines with your nger on the
switch or energizing machines that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before turning
the machine on. A wrench or a key left attached to a
rotating part of the machine may result in personal injury.
e) Do not overreach. Keep proper footing and balance
at all times. This enables better control of the machine in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of
machines allow you to become complacent and
ignore machine safety principles. A careless action
can cause severe injury within a fraction of a second.
 MACHINE USE AND CARE
a) Do not force the machine. Use the correct machine
for your application. The correct machine will do the job
better and safer at the rate for which it was designed.
a
Brushless cordless lawn mower 0180
INTRODUCTION
This machine is intended for domestic lawn mowing only
This machine is not intended for professional use
Check whether the packaging contains all parts as
illustrated in drawing 3
When parts are missing or damaged, please contact your
dealer
Assembly instructions 2
-the sequence of the numbers appearing in the drawing
corresponds with the sequence of the steps to be
followed for assembling the lawn mower
Read this instruction manual carefully before use
and save it for future reference 4
TECHNICAL DATA 1
MACHINE ELEMENTS 3
A Safety switch
B Trigger switch
C Motor control cable
D Telescopic handle
E Handle lock
F Handle-adjustment knob
G Cutting-height adjustment lever
H Battery cover
9. __
J Grass box
K Transport handle
L Front Wheel
M Mulching plug
N Battery level indicator button
15. __
SAFETY
General machine safety warnings
-Read all safety warnings, instructions, illustrations

.
Failure
to follow all instructions listed below may result in electric
shock, re and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE
.
The term “machine” in the warnings refers to your mains-
operated (corded) machine or battery-operated (cordless)
machine.
 WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate machines in explosive atmospheres,

or dust. Machines create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while operating
a machine. Distractions can cause you to lose control.
 ELECTRICAL SAFETY
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0180 in the language / languages: All languages as an attachment in your email.

The manual is 8.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info