617395
33
Zoom out
Zoom in
Previous page
1/75
Next page
33
Seam and Overcasting Stitch Patterns
(Modes 1 and 3)
Overcasting stitches are used to finish the edges of fabric
to prevent fraying. The SINGER
®
Studio™ S18 sewing
machine is equipped with overedge feet designed to
create beautiful and flat seam finishes.
Overcasting with zigzag stitch pattern 08
Machine Setting
Stitch pattern: 08 (Mode 1)
Thread tension: 3-7
Presser foot: Overedge foot C
Foot pressure: 3
Place the fabric edge next to the guide of the foot and then
sew.
1 Edge of fabrics
2 Guide of the foot
3 Wires on foot
CAUTION:
When using the overedge foot C is on the machine, set
the stitch width at 5.0 or wider to prevent the needle from
hitting the wires on the foot.
Seam and Overcast stitch pattern 10
Machine Setting
Stitch pattern: 10 (Mode 1)
Thread tension: 3-7
Presser foot: Overedge foot C
Foot pressure: 3
This stitch can be used to simultaneously seam and
overcast edges of fabrics.
Place the fabric edge next to the guide of the foot and then
sew.
1 Edge of fabrics
2 Guide
3 Wires on foot
CAUTION
When using the overedge foot C, set the stitch width at 5.0
or wider to prevent the needle from hitting the wires on the
foot.
Multiple zigzag stitch pattern 09
Machine Setting
Stitch pattern: 09 (Mode 1)
Thread tension: 3-7
Presser foot: General purpose foot A
Foot pressure: 3
This stitch is used to finish a raw edge on synthetics and
other stretch fabrics that tend to pucker. The three short
stitches created by this stitch pattern make it ideal for
mending tears, applying patches and inserting elastic.
Sew along the fabric edge leaving an adequate seam
allowance. After sewing, trim the seam allowance close to
the stitches.
1
3
2
1
3
2
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer S18 Studio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer S18 Studio in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info