617395
35
Zoom out
Zoom in
Previous page
1/75
Next page
35
Zipper Sewing
Machine Setting
Stitch pattern: 01 (Mode 1)
Thread tension: 2-6
Presser foot: Zipper foot E
Foot pressure: 3
How to attach zipper foot E
Remove presser foot from presser foot holder. Position the
pin on the zipper foot under the groove of the presser foot
holder. To sew the left side of the zipper, attach zipper
foot E with the pin on the right-hand side.
To sew the right side of the zipper, attach zipper foot E with
the pin on the left-hand side.
Lower presser foot holder and snap onto right or left pin.
1 Groove
2 Pin
3 Zipper foot connected to right side
4 Zipper foot connected to left side
How to Insert a Lapped Zipper
Fabric preparation to install a zipper
A lapped zipper is most often used for seam closings on
dresses, skirts and pants.
A lapped zipper is also a good choice for zippers that do
not match the fabric color because it is concealed.
Step 1
Measure the overall opening in fabric. Zipper purchased
should be 3/8” (1cm) longer than then overall opening.(2)
1 Right sides of the fabric
2 3/8” (1cm)
3 Opening size
4 Zipper size
5 Slider
6 Zipper teeth
7 Zipper tape
8 Wrong side of the fabric
9 End of the zipper opening
Step 2
With the right sides of the fabric together reinforce with
a reverse stitch at the end of the zipper opening. (9)
Baste with a straight stitch the remaining seam with a
long stitch length and loosened thread tension. The
loose tension will make it easy to remove the stitches
after zipper insertion. (11)
10 Seam allowance
11 Basting
12 Reverse stitches
1
2
2
3
4
5
8
6
7
11
9
10
12
9
13
1
2
3
4
1
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer S18 Studio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer S18 Studio in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info