617395
31
Zoom out
Zoom in
Previous page
1/75
Next page
31
Basting Stitch Pattern 07
Machine Setting
Stitch pattern: 07 (Mode 1)
Thread tension: 1-3
Presser foot: Darning/Embroidery foot P-2
Foot pressure: 1
Feed dog: Dropped
The basting stitch pattern allows you to position and sew
straight stitches to baste fabric together. These long
stitches are easy to remove after the project is complete.
The distance between each stitch is determined by how far
the fabric is physically moved by you.
Lower the feed dogs
Set the presser foot pressure dial at 1”.
Attaching the darning/embroidery foot P-2
Loosen the thumbscrew and remove the presser foot
holder. Attach the darning/embroidery foot P-2 to the
presser bar. The pin located at the top of the foot should
rest on top of the needle clamp screw when the needle is
in the highest position. Tighten the thumbscrew firmly with
the screwdriver.
1 Thumbscrew
2 Pin
3 Needle clamp screw
To sew
Hold both needle and bobbin thread under the foot and to
the back.
Depress the foot control. The machine will take one stitch
and stop automatically.
Release the foot control.
Hold the fabric taut and slide it to where you want the next
stitch.
CAUTION
The knee lifter can be very useful when sewing basting
stitches. The lifter allows you to raise the presser foot
higher and release the tension completely on the thread.
Do not pull the fabric while the needle is forming the stitch.
The fabric may deflect the needle causing it to break.
1
3
2
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer S18 Studio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer S18 Studio in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info