616714
23
Zoom out
Zoom in
Previous page
1/72
Next page
21
USO DEL ENSATADOR AUTOMATICO
Asegurarse de levantar la palanca del prensatelas y la
aguja a la posición más elevada antes del ensartado.
HELPFUL SUGGESTIONS:
Put a drop of sewing machine oil onto the felt disc,
if the machine is used after a long interval.
If the threading hook is deviated from needle hole,
adjust the position of the hook using a small screw
driver.
SUGGESTION UTILE :
Mettez une goutte d’huile pour machine à coudre
sur le disque de feutre, si vous n’avez pas utilisez
la machine depuis un certain temps.
Si la fourchette d’enfilage ne s’insère pas dans
le chas de l’aiguille, ajustez la position de la
fourchette en utilisant un petit tournevis.
SUGERENCIAS UTILES
Poner una gota de aceite el el disco de eltro, si la
máquina ha sido usada por un largo periodo.
Si el gancho se desvía del oricio de la aguja, ajuste
la posición del gancho con un pequeño desarmador.
If the threading hook cannot catch thread, adjust
the vertical position by bending the twin thread
guide.
Si la fourchette d’enfilage ne peut agripper le fil,
ajustez la position vertical du guide double de
l’enleur.
Si el gancho no jala el hilo, ajuste la posición
vertical doblando la guía de hilo.
1. Ensarte la máquina con su mano izquierda mientras
detiene el hilo con la derecha. Enganche el hilo en el
guía hilo de la barra de aguja y jálelo hacia usted dejando
alrededor de 4” (10 cm) de hilo.
2. Enganche el hilo en el guía hilo doble (A y B).
3. Jale el hilo suavemente en el corta hilo, corte y manténgalo
en su lugar.
4. Jale la palanca de ensartado a su más baja posición hasta
que la doble-guía hilo gire y pare.
5. Libere la palanca y la aguja se ensartará automáticamente.
Si (la palanca) no regresaa la posición original, levante
suavemente con la mano.
6. Jale el rizo de hilo sobrante lejos de usted.
No jale el hilo con fuerza o éste se saldrá del
oricio de la aguja antes de ser ensartada.
Asegúrese de que la guía no toque la tela, etc.
Si la aguja no se ensartó correctamente, volver a
ensartar desde el paso 1
IMPORTANT: If the needle cannot be threaded due to
the nature of thread, manually thread the needle after
hooking thread to the thread guide on the needle bar.
NOTA:
Para un fácil ensartado, se recomienda jar la máquina
en posición de costura recta (posición de la aguja al
centro) cuando se use el ensartador de aguja automático.
Los hilos gruesos no se pueden ensartar en agujas
delgadas.
No bajar la palanca de ensartado mientras la máquina está
funcionando o se puede romper el gancho del ensartador.
6
5
4
Threading lever
Levier d'enlage
Palanca de ensartado
23


Need help? Post your question in this forum.

Forumrules
1

Forum

singer-70

Reset search

  • I need to know how to oil and clean a singer sewing machine model 2282 Submitted on 28-10-2020 at 20:24

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 70 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 10,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info