616714
22
Zoom out
Zoom in
Previous page
1/72
Next page
20
1. Thread the machine with your left hand while gripping the
thread with your right hand. Hook thread to the thread
guide on the needle bar and pull it toward you leaving
about 4” (10 cm) clear.
2. Hook thread to the twin thread guide (A and B).
3. Pull thread gently into the thread cutter/holder to cut and
hold it in place.
4. Pull down the threading lever to its lowest position until the
twin thread guide rotates and stops.
5. Release the threading lever and needle will be threaded
automatically. If the threading lever should not return to the
original position, raise it gently by hand.
6. Pull thread loop away from you.
1. Enlez le l de la machine avec votre main gauche tout en
tenant le l fermement de la main droite. Insérez le l dans
le guide l de la barre d’aiguille et tirez le vers vous d’environ
10 cm (4 po).
2. Faire passer le l dans le guide l double (A et B).
3. Tirez le fil doucement vers le coupeur et reteneur de fil
pour le couper et le retenir.
4. Abaissez le levier d’enlage en position basse jusqu’à ce que
le guide de l double tourne et s’arrête.
5. Relâchez le levier d’enfilage et l’aiguille sera enfilée
automatiquement. Si le levier d’enlage ne retourne pas à
ça position d’origine soulevez-le doucement à la main.
6. Tirez la boucle du l vers l’arrière de la machine.
USING AUTOMATIC NEEDLE THREADER
Be sure to raise the presser foot lifter and raise the needle
to its highest position before threading.
Don’t pull thread with strong force or thread may
be pulled off from needle hole after threading.
Ne tirez pas trop fort sur le fil car le fil pourrait
ressortir du chas de l'aiguille après avoir été enlée.
Make sure that the guide doesn’t touch fabric, etc. Assurez-vous que le guide ne touche pas au tissu, ect.
If the needle has not been threaded correctly, re-
thread from step 1.
Si l'aiguille n'est pas enlée correctement, répétez
le processus depuis l'étape 1.
IMPORTANT: If the needle cannot be threaded due to
the nature of thread, manually thread the needle after
hooking thread to the thread guide on the needle bar.
IMPORTANT: si l'aiguille ne peut être enlée due au type
de l, enlez l'aiguille manuellement après avoir inséré
le l dans le guide de la barre d'aiguille.
NOTE:
For smooth threading, it is recommended that the
machine be set for straight stitch (in center needle
position) when using the automatic needle threader.
Heavy thread cannot be threaded through fine
needle.
Don’t lower the threading lever while the machine is
in operation or the threading hook may be broken.
REMARQUE:
Afin de faciliter l’enfilage, il est recommandé
de régler votre machine au point droit lors de
l’utilisation de l’enleur d’aiguille.
Un l épais ne peut s'insérer dans un aiguille ne.
N'abaissez pas le levier d'enfilage lorsque la
machine est en marche.
2
1
Twin thread guide
Guide-l double
Guía doble hilo
Threading hook
Fourchette d'enlage
Gancho del ensartador
Thread guide
Guide-l
Guía hilo
B
A
Felt disc
Disque de feutre
Disco de eltro
UTILISATION DE L’ENFILEUR DE CHAS
D’AIGUILLE
Assurez-vous de soulevez le pied presseur et d'amener
l’aiguille en position haute en tournant le volant vers vous
(sens antihoraire) avant d'enler la machine.
3
Thread cutter/holder
Coupeur et reteneur de l
Cortador de hilo
22


Need help? Post your question in this forum.

Forumrules
1

Forum

singer-70

Reset search

  • I need to know how to oil and clean a singer sewing machine model 2282 Submitted on 28-10-2020 at 20:24

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 70 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 10,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info