621496
99
Zoom out
Zoom in
Previous page
1/132
Next page
Installation
22081814H 97
Drive unit voltage selection
This menu option requires the installer to set the drive unit voltage to
the correct level. The selections are 12V, 24V or 32V and should be set
to the voltage specified for your drive unit.
voltage 12V
Drive unit
INSTALLATION
Note ! Selection of improper voltage level for your drive unit may damage both the
drive unit and junction unit even if the protection circuits in the junction
unit are activated.
Refer to the drive unit table on page 72 for information. It is not
possible to select a higher voltage than the input voltage. The
CLUTCH/BYPASS voltage is automatically set to the same as the drive
unit voltage. The AP300X system will also automatically detect
whether the drive unit is a reversible motor or solenoid operated.
To change the voltage selection, rotate the course selector.
Proceed to next menu item by pressing STBD [>] button.
Rudder Feedback Calibration
calibration?
Rudder feedbk
INSTALLATION
This function enables you to compensate for any non-linearity in the
mechanical transmission between rudder and Rudder Feedback Unit.
Confirm by rotating the course selector clockwise. The display may
now show:
002 Adjust?
max.STBD
INSTALLATION
Turn rudder
Manually turn the helm wheel to starboard until the rudder stops at
maximum starboard rudder.
034 Adjust?
max.STBD
INSTALLATION
Turn rudder
The value shown on the display is the value read by the feedback unit
before any adjustment is made. The arrow indicates to which side the
rudder is positioned. If the displayed angle is different from the actual
angle, set correct rudder angle on the display by turning course
selector clockwise to increase the value or counter clockwise to
decrease the value.
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad Robertson AP300X Marine Autopilot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad Robertson AP300X Marine Autopilot in the language / languages: English as an attachment in your email.

The manual is 4,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info