28530
43
Zoom out
Zoom in
Previous page
1/182
Next page
Operational procedures
35
850-164692 / Rev.B
Previously recorded data
The Calibration program also allows you to work with
previously recorded calibration data.
If you have used the ER60 to record raw data from a previous
calibration session you may operate the ER60 in replay mode
and perform the described calibration procedure as if the ER60
was operating in Normal mode. When operating in Replay
mode you can set the ping rate to maximum since this will not
affect the data quality.
Offline calibration
The calibration program may be run offline without an
operational ER60. To start it, locate the file calibration.exe. If
you have performed a standard installation, this file is normally
found in the following path:
c:\program files\simrad\scientific\ek60\bin\calibration.exe
If you have a calibration file previously generated by the ER60
calibration program, you can import the file in the calibration
program.
1 Open the File menu in the calibration window, choose
Open.
2 Select the file you would like to import, and click OK.
3 Examine and edit the previously recorded calibration data.
Edited data may be saved and you can update the transducer
parameters using the imported or edited calibration data. This
also enables you to use different calibration files from different
environmental conditions.
Related topics
Environment, page 77
Normal Operation, page 102
Ping Control, page 105
Single Target Detection, page 117
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad ER60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad ER60 in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info