28530
38
Zoom out
Zoom in
Previous page
1/182
Next page
Simrad ER60 Operator manual
30
850-164692 / Rev.B
The same structure can be repeated for the different pulse
durations for each frequency. When you save the calibration file,
create a file name that includes the current date and the current
output power. Save the information as a TXT file. Example:
....\0.256msec\cal010603-2000w.txt
While the calibration takes place, we recommend that you also
collect a raw data file. Browse the file directory in the Store
dialogue box to locate the correct directory. The raw data file
name will be generated automatically, but you may specify a
prefix. The raw data file is used for replay.
The same procedure can be repeated for each of the installed
frequencies.
Observe the following calibration procedure.
1 Ensure that only one transceiver is installed in the ER60
echo sounder software.
2 From the Operation menu, select Ping control.
3 In the Ping Control dialogue, set Ping rate to Interval
and 1 second.
- This can also be done from the Toolbar.
4 From the Operation menu, select Normal.
5 In the Normal Operation dialogue, select transceiver, and
switch to Active mode.
6 In the Normal Operation dialogue, set the Transmit
Power to the level you wish to calibrate.
7 In the Normal Operation dialogue, choose the Pulse
Duration you wish to calibrate.
8 Right-click in an echogram, select Range on the shortcut
menu, and set the range for one of the echogram views to
cover the range you wish to see.
- This range should include the depth range where you
expect to find the reference target.
9 Check that you see the reference target in the Single Echo
view.
10 Click the right mouse button in the Single Echo view
corresponding to the echogram to open the Single Target
Detection dialogue box.
11 In the Single Target Detection dialogue, click the
Calibration button to start the calibration program, and to
create a new Calibration window.
- The calibration program allows you to record new
calibration data, or read previously recorded calibration
data.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad ER60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad ER60 in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info