Manual Silvercrest SV 125 B2 KAT - IAN 321553 (page 12 of 104) (English, German, Dutch, Danish, French)

696408

12

Zoom out

Zoom in

Previous page

1/104

Next page

10

GB

3. Place the vacuum bag flat on a level

surface with the valve pointing up-

wards.

4. Proceed as for vacuum containers, start-

ing at step 2 (see “Vacuum containers”

on page 9), and use adapter A20.

NOTE: suitable vacuum bags with valves

can be ordered from the online shop under

article number 306376 (see “Ordering film

bags and accessories” on page 14).

8.3

Filling bags (without

valves)

CAUTION:

~ No food or liquids must be present at

the top edge, where you want to seal

the bag. That area must be clean and

dry. Otherwise, it is impossible to pro-

duce a proper welding seam.

• Fill the bag only up to a level of 6 cm

below the top edge.

8.4 Activating the Wet

function

DANGER! Risk of electric

shock due to moisture!

~ For vacuum-packing, no liquids must be

inside the bag.

~ Ensure that no liquid is sucked in during

the extraction of air. If this nevertheless

occurs, immediately interrupt the pro-

cess by pressing the active function but-

ton again.

If the bag contains moist food (e.g. marinad-

ed meat/fish, ready-to-use cut vegetables/

fruit), this can result in incomplete seals. Ac-

tivating the Wet function 1 increases the

sealing time in order to obtain a better weld-

ing seam.

• Press the 1 button before vacuum-

packing/sealing to activate the func-

tion. The LED lights up.

• To deactivate the function, press the but-

ton 1 again.

• When the vacuum-packing/sealing pro-

cess is completed or has been can-

celled, the LED goes out and the

function is automatically deactivated.

• During the vacuum-packing/sealing

process, the Wet function 1 can

neither be activated nor deactivated.

NOTE: This function is not suitable for vacu-

um-packing liquids, e.g. soup. These need

to be frozen before vacuum-packing.

8.5 Activating the Soft

function

The Soft5 function reduces the vacuum

pressure slightly, so that pressure-sensitive

food (e.g. berries or cake) is not com-

pressed.

• Press the Soft5 button before vacuum-

packing/sealing to activate the func-

tion. The LED lights up.

• To deactivate the function, press the

Soft5 button again.

• When the vacuum-packing/sealing pro-

cess is completed or has been can-

celled, the LED goes out and the

function is automatically deactivated.

• During the vacuum-packing/sealing

process, the Soft function 5 can nei-

ther be activated nor deactivated.

8.6 Sealing bags (without

valves)

1. Smooth the bag where it is to be

sealed.

2. Open the lid12. If necessary, press the

buttons9 first.

__321553_Vakuumierer_B6.book Seite 10 Mittwoch, 3. Juli 2019 11:15 11

1

Bonjour
J'ai un appareil de mise sous vide Silvercrest SV 125 B2 KAT et je ne sais ou commander le fil à souder pour le remplacer car il est abimer
D'avance merci
Cordialement Submitted on 3-3-2022 at 08:48
Reply Report abuse
À quoi sert la bande en mousse dans la boîte d'emballage Submitted on 10-6-2021 at 10:45
Reply Report abuse
À quoi sert le bande en Louise dans la boîte de l'appareil de Lise sous vide
Submitted on 10-6-2021 at 10:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Silvercrest SV 125 B2 KAT - IAN 321553 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SV 125 B2 KAT - IAN 321553 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 4,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SV 125 B2 KAT - IAN 321553

Silvercrest SV 125 B2 KAT - IAN 321553 User Manual - German, French, Italian - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info