Manual Silvercrest SV 125 B2 KAT - IAN 321553 (page 14 of 104) (English, German, Dutch, Danish, French)

696408

14

Zoom out

Zoom in

Previous page

1/104

Next page

12

GB

6. Use both hands to press firmly on the

edges of the lid12. They must audibly

click into place.

7. Press the button 4. The LED lights up.

The film bag is first vacuum-packed and

then sealed.

The LED goes out when the process is

complete.

NOTE: If the LED4 does not go out and the

noise of the vacuum pump does not stop, de-

spite the fact that no further air is being

sucked out of the film bag, cancel the pro-

cess. Check that the film bag is in the correct

position in the device, and check for leaks.

8. Simultaneously, press buttons9 in order

to release the lock of the lid12.

9. Open the lid12 and remove the bag.

10. Check the welding seam. It should be a

smooth creaseless seam.

9. Cleaning and storage

DANGER! Risk of injury

through burning/scalding!

~ Allow the device to cool down com-

pletely before you clean it or put it

away.

~ The welding wire17 becomes very hot

during operation. Do not touch the hot

welding wire17.

DANGER! Risk of electric

shock!

~ Prior to cleaning, disconnect the mains

plug6 of the device.

DANGER! Risk of electric

shock due to moisture!

~ The device and the power cable with

mains plug6 must not be immersed in

water or other liquids.

WARNING! Risk of material dam-

age!

~ Do not use any sharp or abrasive clean-

ing agents.

9.1 Cleaning

In order to ensure the proper function and

the full capacity of your device, clean it reg-

ularly.

• Wipe down the housing of the device

with a damp cloth.

• Prior to the next use, the device must be

completely dry.

Collector

1. Grasp the centre or both outer ridges

with your fingers and carefully lift the

collector for liquids18 out upwards.

2. Drain the liquid.

3. Rinse the collector18 under warm dish-

water or place it in the dishwasher.

Make sure it is dry before inserting it.

4. Insert the collector18 into the device

from above.

Sealing ring

1. Grasp the sealing ring16 with two fin-

gers and lift it off upwards.

2. Rinse the sealing ring16 under warm

dishwater. Make sure it is dry before in-

serting it.

3. Replace the sealing ring16 in the re-

spective form inside the device. Ensure

that it lies in smooth contact and is not

wavy.

NOTE: the sealing ring16 is a wearing

part. Due to the high contact pressure, it will

__321553_Vakuumierer_B6.book Seite 12 Mittwoch, 3. Juli 2019 11:15 11

1

Bonjour
J'ai un appareil de mise sous vide Silvercrest SV 125 B2 KAT et je ne sais ou commander le fil à souder pour le remplacer car il est abimer
D'avance merci
Cordialement Submitted on 3-3-2022 at 08:48
Reply Report abuse
À quoi sert la bande en mousse dans la boîte d'emballage Submitted on 10-6-2021 at 10:45
Reply Report abuse
À quoi sert le bande en Louise dans la boîte de l'appareil de Lise sous vide
Submitted on 10-6-2021 at 10:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Silvercrest SV 125 B2 KAT - IAN 321553 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SV 125 B2 KAT - IAN 321553 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 4,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SV 125 B2 KAT - IAN 321553

Silvercrest SV 125 B2 KAT - IAN 321553 User Manual - German, French, Italian - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info