684864

Silvercrest SSDMD 600 A1 - IAN 287485 Manual

23
Zoom out
Zoom in
Previous page
1/100
Next page
21
GB
the blender jug|4 back on the motor
block|7.
1. Unwind the required length of power
cable|10 from the cable spool|11.
2. Figure B: place the blender jug|4 on
the motor block|7. The arrow T must
point to the symbol at the bottom of
the blender jug. Fill the prepared food
into the blender jug|4.
3. Figure B: close the blender jug|4 with
the lid|2.
4. Figure B: turn the lid|2 fully into the
handle|5 in order to firmly connect it to
the blender jug and close the safety de-
vice|3.
5. If necessary, turn the marker stripe of
the control dial|9 to 0.
6. Insert the measuring jug|1 into the
lid|2 and lock it by turning it clockwise.
7. Figure B: lock the blender jug|4 by
rotating through a short distance. The
arrow T at the bottom of the blender
jug points to the symbol. This closes
the second safety device|8.
8. Insert the mains plug|10 into a wall
socket corresponding to the technical
data.
7. Operation
WARNING!
~ In order to avoid damage to the device,
interrupt the blending process immedi-
ately if the blades of the blade assem-
bly|6 do not turn at all or only with
difficulty. If this happens, pull out the
mains plug|10 and check whether there
is something in the blender jug|4 block-
ing movement or whether the food is too
tough. Also check whether the device is
assembled correctly.
~ The device is designed for a maximum
operating period of 3 minutes without
interruption.
After this, the device must remain
switched off until it has cooled down to
room
temperature.
CAUTION:
~ Depending on the hardness and consist-
ency of the food, do not fill the blender
jug|4 up to the maximum level, as this
can cause the blade assembly|6 to be-
come blocked.
Application area
The jug blender is designed to mix whole-
fruit beverages (smoothies) and to chop
food and crush ice.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSDMD 600 A1 - IAN 287485 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSDMD 600 A1 - IAN 287485 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info