Manual Silvercrest SSDMD 600 A1 - IAN 287485 (page 22 of 100) (English, German, Dutch, French, Portuguese, Spanish)

684864

Zoom out

Zoom in

1/100

fruits (e.g. cherries, peaches, apricots)

must be removed before blending.

~ In order to avoid damage to the device,

interrupt the blending process immedi-

ately if the blades of the blade assembly

do not turn at all or only with difficulty.

Pull out the mains plug and investigate

whether there is an obstruction in the

blender jug or whether the contents are

too tough. Also check whether the de-

vice is assembled correctly.

~ Never mix food on an oil basis such as

poppy seed or nuts (for instance for

poppy seed or nut butter) for more than

60 seconds, since otherwise the motor

may overheat and can be damaged.

~ Do not operate the device when it is

empty, as this causes the motor to over-

heat and may result in it being dam-

aged.

~ The device is designed for a maximum

operating period of 3 minutes without

interruption.

After this, the device must remain

switched off until it has cooled down to

room temperature.

~ Only use the original accessories.

All parts except for the motor block are

dishwasher-safe up to 70 °C.

~ Do not use any astringent or abrasive

cleaning agents.

~ The device is fitted with non-slip plastic

suction feet. As furniture is coated with

a wide array of varnishes and synthet-

ics, and is also treated with different

care products, it cannot be fully ruled

out that some of these materials contain

ingredients that could attack and soften

the non-slip plastic suction feet. If neces-

sary, place a non-slip mat under the de-

vice.

4. Items supplied

1 blender jug|4 (min 250 ml –

max|1.75 litres filling volume)

1 motor block|7

1lid|2

1 measuring jug (30, 45, 60 ml)|1

1 copy of the user instructions

5. How to use

• Remove all packing material.

• Check to ensure that all parts are pres-

ent and undamaged.

• Clean the device prior to its first

use! (see “Cleaning” on page 23)

• Place the device on a dry, level and

non-slip surface.

6. Assembly

DANGER! Risk of injury from

cutting!

~ The blade assembly|6 is sharp. Handle

it with care.

~ Do not insert the mains plug|10 into a

wall socket until the jug blender has

been completely assembled.

NOTES:

• The device is equipped with two

safety

switches

and must be locked

twice. The device can only be put into op-

eration when the blender jug

and the

lid|

are in position and locked. Should it

be possible to switch on the device also

without the blender jug

in place, do

not operate the device any longer. Con-

tact our Service Centre by

telephone

(see “Warranty of the

HOYER Handel GmbH” on page 27).

• If the blender jug|4 is removed during

operation, the device will switch off auto-

matically. Adjust the control dial|9 so

that the marking is pointing to 0 in order

to switch off the device before placing

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSDMD 600 A1 - IAN 287485 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SSDMD 600 A1 - IAN 287485 Manual

Product: