•You can use the volume buttons (29, 31) to adjust the volume to your requirements.
•
If you wish, you can change the audio settings using the relevant buttons on the remote control.
See the user manual for the TV set.
9.3.3 “BLUETOOTH” mode
The Bluetooth device name ofthe sound bar isSSB 70 C3.
If
you are prompted for a PIN during the pairing process, enter "0000".
It can take a variable amount of time to establish the connection, depending onthe device.
Establishing a connection
•
Press the button (15) to switch to Bluetooth mode.
After switching to Bluetooth mode, the sound bar automatically connects to a paired devices (a steady “bt” is shown on the LED display (1)) or,
if no paired device is found, automatically switches to Bluetooth pairing mode (the LED display (1) shows a flashing “bt”). If the connection to a
paired devices is lost, the device switches off after approx. 10 minutes.
•If your playbackdevice has not yet been pairedwith t
he sound bar, the display flashes “bt”.
•Start Bluetooth scanning mode onyour playback device(e.g. smartphone). Itshould then find thesound bar under the name “SSB 70 C3”.
•Now establish aBluetooth connection betweenyour playback deviceand the sound bar.
•Once aconnectionhas beenestablished, the LED display (1) shows “bt” anda confirmation beep sounds.
Generally, you should only have to pair once as the playback device saves the name of the sound bar. This means you do not need to pair the
devices manually when you establish the connection again.
If you wish to disconnect an existing Bluetooth pairing or switch to pairing mode, press and hold the button (15) on the remote control for
about 1 second.
•Now start music playback from the source device. The sound is played back via the sound bar.
•You can use the (16), (17) and(30) buttons on the remote control or your source device to control playback.
•You can use the volume buttons (29, 31) to adjust the volume to your requirements.
Disconnect
The Bluetooth pairing is disconnected if …
•... either of the devices is switched off. A confirmation beep will sound.
•... Bluetooth is switched off. A confirmation beep will sound.
•... the sound bar and source device are beyond the Bluetooth range (approx. 10 metres).
9.3.4 “USB” mode
The sequence of the tracks/folders played is determined by the order in which they are copied to the USB stick.
In this mode, you can use the sound bar to play back audio files stored on a USB storage device, e.g. a USB stick. If connecting a USB hard drive, please note
that the maximum current on the sound bar’s USB connection is 500 mA. Please also see the user manual for the USB hard drive.
If you want to use a hard drive as a USB playback device, use a Y-cable with a separate power supply to connect it.
Please note there can occasionally be compatibility issues between the USB storage device and the sound bar, meaning only limited functionality
is available or it may not function at all. If this happens, try a different USB storage device.
•Connect the USB storage device to the USB port (4) on the sound bar.
•Press the “USB” button (33) on the remote control to select this mode.
•Use the (16), (18), (17) and(30) buttons on the remote control to control the music tracks.
•
You can use the volume buttons (29, 31) to adjust the volume to your requirements.
•
If you wish, you can change the audio settings using the relevant buttons on the remote control.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Silvercrest SSB 70C3 - IAN 315507 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Silvercrest SSB 70C3 - IAN 315507 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.
The manual is 2,47 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
