Press the button (16) if playback was previously paused with
the button (18).
Resume playback at beginning of last folder played.
Briefly press the button (17).
Skip to next track.
Press and hold the button (17).
Skip to 1st track of next folder.
Briefly press the button (30).
Skip to previous track.
Press and hold the button (30).
Skip to 1st track of previous folder.
Press the button (18).
Pause playback, playback continues with the first track in the last folder
played when the button (16) is pressed.
Press the button (18) twice in quick succession.
Skip to 1st track of 1st folder.
Pressing the button (28) repeats the track currently being played (display shows “ON”) or repeats all tracks stored on the storage device (display shows
“AL”).
LED display Function
ON
Repeats the current track.
AL
Repeats all tracks.
CAUTION! The USB port (4) must not be used to charge external devices.
9.3.5 “AUX” mode
Use this mode to connect a playback device with a Cinch output, e.g. a DVD player or satellite receiver. Use the adapter cable provided (E).
•Connect the Cinch output from your playback device to the AUX jack (11) on the sound bar.
•Switch the sound bar on using the standby button (2, 35).
•Press the “AUX” button (34) on the remote control to select this mode.
•
You can use the volume buttons (29, 31) to adjust the volume to your requirements.
•
If you wish, you can change the audio settings using the relevant buttons on the remote control.
9.4 Volume and audio settings
Any changes to the volume and audio settings are shown on the LED display (1) for approx. 2 seconds. The display then reverts back to
the standard display for the relevant mode.
9.4.1 Adjusting the volume
You can adjust the volume during playback using the volume buttons (29, 31) on the remote control. Alternatively, you can use the volume buttons (3, 5) on the
sound bar. You can also hold the buttons down the change the setting more quickly. The volume selected is shown on the LED display (1) for approx. 2 seconds.
If you set the volume to the lowest level, “V 00” flashes continuously on the LED display (1).
9.4.2 Muting the sound
Press the button (12) to mute the sound temporarily.
9.4.3 Adjusting the treble and bass
You can adjust the treble to your requirements using the TREBLE+ (19) and TREBLE- (27) buttons.
To adjust the bass, press the BASS+ (20) and BASS- (26) buttons.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Silvercrest SSB 70C3 - IAN 315507 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Silvercrest SSB 70C3 - IAN 315507 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.
The manual is 2,47 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
