Open the battery compartment (23) on the back of the remote control by sliding the battery compartment cover in the direction of the arrow and removing it. Insert
the batteries (2 AAA-type batteries) with the correct polarity (+ and -). The correct polarity is labelled on the batteries and inside the battery compartment (23). Re-
insert the cover of the battery compartment (23) and slide it in the opposite direction of the arrow until it locks in place. Please also refer to Figure B on the fold-
out cover page.
8.3 Connection options / Operating modes
CAUTION! Make sure that the sound bar and the devices to be connected are switched off when you connect them. Please also read the
user manual for the device to be connected.
The HDMI (ARC) connection only works if all the components connected are ARC-compliant. Use the HDMI (ARC) cable (C) supplied.
See also the user manual for the connected device.
The cable used for playback must not exceed a length of 3 metres.
The SSB 70 C3 sound bar lets you play sound and/or music from various sources:
Playback can be controlled using the buttons on the device or the remote control.
You can use the Source button (2) or the remote control to select the operating mode you want. The operating modes and corresponding display information can
be found in the table below:
Operating mode /
Source
Input Use Button on remote
control
Display
HDMI ARC HDMI(ARC) (9)
Connection via HDMI (ARC) cable to the HDMI (ARC) jack, e.g. TV
or DVD player
HDMI(ARC) (13) Hd
OPTICAL OPTICAL (10)
Connection via Toslink cable, e.g. TV or digital receiver
OPTICAL (14) OPtI
BLUETOOTH
®
----- Via wireless connection, e.g. from smartphone
button (15) bt
USB USB (4)
Connection of USB media, e.g. USB stick to play back audio files
(audio formats supported: MP3 and WAV)
USB (33) USB
AUX USB (11)
Connection via adapter cable (stereo jack/Cinch), e.g. DVD player
or satellite receiver
AUX (34) AUX
8.4 Display information
Every time a setting is changed on the sound bar, the LED display (1) lights up on full brightness for around 8 seconds before reverting back to the lower brightness
level.
Setting LED display
“Standby” - -
“HDMI(ARC)” mode Hd
“BLUETOOTH
®
” mode bt
“OPTICAL” mode OPtI
“USB” mode USB
“AUX” mode AUX
“MOVIE” audio settings CINE
“DIALOG” audio settings dIA
“MUSIC” audio settings SONG
“3D” audio settings 3d
“VOL-“ / „VOL+” V 00 to V 40
“TREBLE” t -5 to t 5
“BASS” b -5 to b 5
For USB playback Track runtime in mm:ss format
“ON” or “AL”
Press the button (32) to switch off the LED display (1). Pressing the button (32) again or any other button switches the LED display (1) back on again.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Silvercrest SSB 70C3 - IAN 315507 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Silvercrest SSB 70C3 - IAN 315507 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.
The manual is 2,47 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
