Manual Silvercrest SMZS 260 D3 IAN 88609 (page 49 of 54) (English, German, Dutch, French, Italian)

739938

Zoom out

Zoom in

1/54

• Figure D: In order to work at high

speed, additionally press down on the

TURBO 1 button.

• Work using short pulses (1pulse: press

for approx. 1second).

The number and

length of the pulses will depend on the

quantity and consistency of the food. See

the specifications given in the

"Process-

ing table" section.

• Repeatedly check the result. If the food

is not being chopped evenly:

- Pull out the mains plug 2, remove the

motor block 3 and thoroughly shake

the vessel 7.

- If food is sticking to the inside wall of

the vessel, rotate the working cover 4

anti-clockwise and remove it. Push the

pieces downwards using a spatula.

- Put all the pieces back together be-

fore you reinsert the mains plug 2 into

a wall socket and resume work.

6.2 Cream attachment

Application area

The cream attachment 5 has been specially

designed for whipping cream in the multi

chopper. It is placed on top of the blade in-

sert 6. There are two options here: one for

smaller quantities (up to 100 ml) and one for

larger quantities (100 to 200 ml).

NOTE: Wherever possible, work with well

cooled whipping cream (refrigerator temper-

ature), so that the whipped cream reaches a

firm consistency.

Whipping cream

1. Place the vessel 7 on the vessel cover 9.

2. Carefully place the cream attachment 5

onto the blade insert 6 from above.

- Up to 100 ml: Figure E: Rotate the

cream attachment so that it is in con-

tact with both blades and clicks into

place.

- 100 to 200 ml: Figure F: Rotate the

cream attachment so that it is in con-

tact with one of the blades and clicks

into place. This causes it to sit higher

in the vessel.

3. Place the blade insert 6 together with

the cream attachment 5 onto the spin-

dle8 in the vessel.

4. Pour the cooled whipping cream (maxi-

mum 200 ml) into the vessel 7.

5. Place the working cover 4 onto the ves-

sel 7 in such a way that the two small

tabs on the working cover fit into the

grooves in the vessel and rotate the

working cover clockwise until it clicks

into place.

6. Place the motor block 3 into the upper

edge of the working cover 4.

NOTE: The motor block does not fit

onto the working cover entirely straight

on the right-hand side.

7. Press down on the motor block

and hold

it pressed down for approx. 30 to 50 sec-

onds. Check the result while doing so.

6.3 Remove food

NOTE:

You can choose to use the vessel cov-

as the cover or the base

(FigureG)

1. Disconnect the mains plug 2 from the

wall socket.

2. Remove the motor block 3.

3. Rotate the working cover 4 anti-clock-

wise and remove it.

4. Carefully remove the blade insert 6 (if

necessary together with the cream at-

tachment 5) from the vessel 7.

5. Remove the food, e.g. using a spatula.

6. Clean the device as soon as possible af-

ter use.

__RP88609_B1.book Seite 47 Dienstag, 15. Januar 2013 3:30 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SMZS 260 D3 IAN 88609 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SMZS 260 D3 IAN 88609 Manual

Product: