575448
30
Zoom out
Zoom in
Previous page
1/34
Next page
27
SKTG 2200 A1
GB
NOTE
The indicator lamp 0 illuminates while the
appliance is heating up to the set temperature
level. When the temperature level has been
reached, the indicator lamp 0 goes out.
However, this may come on and go off again
at any time. This indicates that the set tem-
perature has briefl y fallen and the appliance
is heating itself back up.
2) Apply a little vegetable oil to the griddles
2/3/4.
NOTE
Excess fat or other fl uids will run into the fat
drip tray 6!
3) Place the food to be grilled on the appropriate
griddles 3/4:
Food that needs to be cooked on both sides
at the same time should be placed on the
lower griddle of the contact grill 3; then
close the lid so that the upper griddle of the
contact grill 2 is on top of the food.
NOTE
The hinges of the lid are designed especially
so that the lid adapts to the thickness of the
food to be grilled and lies fl at on top of the
food.
If the lid does not lie fl at on top of the food,
the food is too thick for the contact grill. In
this case, use the teppanyaki griddle 4.
Lay food that is too thick to be cooked
evenly in the contact grill on the teppanyaki
griddle 4 and turn it at regular intervals.
4) Remove the food from the griddles 3/4 with
the help of heat-resistant plastic or wooden
implements once it is ready.
5) Turn the thermostat 9 to "0".
6) Remove the plug from the mains power socket.
Cleaning and care
DANGER – RISK OF ELECTRIC SHOCK!
Before cleaning the appliance, disconnect
the plug from the mains power socket! Risk of
electric shock!
NEVER immerse the appliance in water or
other liquids!
WARNING! RISK OF INJURY!
Always allow the appliance to cool down
before cleaning it. Otherwise there is a risk
of burns!
ATTENTION! DAMAGE TO PROPERTY!
Do not use abrasive or aggressive cleaning
materials. These could damage the surface of
the appliance!
Use the plastic spatula q to push any excess
fat or liquid through the outlet 7 into the fat
drip tray 6. Wipe up any remaining fat using
a kitchen towel.
Wipe the griddles 2/3/4 with a moist cloth.
NOTE
If any stubborn residue is still stuck to the
griddles 2/3/4, add a little detergent
to the damp cloth. After this, wipe off the
griddles 2/3/4 with clean water. Ensure
that no detergent residue remains on the
griddles 2/3/4.
If you have used detergent to clean the
griddles 2/3/4, make sure that you rub
them lightly with oil again afterwards, other-
wise the non-stick coating will not function
optimally.
LB1.indb 27LB1.indb 27 13.11.13 15:4813.11.13 15:48
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKTG 2200 A1 - IAN 93493 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKTG 2200 A1 - IAN 93493 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info