575448
29
Zoom out
Zoom in
Previous page
1/34
Next page
26
SKTG 2200 A1
GB
Assembly and setting up
WARNING! RISK OF FIRE!
Never place the appliance underneath wall
cupboards or next to curtains, cupboard
walls or other fl ammable objects.
Always place the appliance on a heat-resist-
ant surface.
1) Remove all of the parts from the box and
remove the packaging material and any
protective fi lm.
2) Clean all components as described in the sec-
tion "Cleaning and care". Ensure that all parts
are completely dry.
3) Place the appliance on a heat-resistant, clean
and level surface. Ensure that you do not place
the appliance directly next to a wall or a
cupboard.
4) Push the fat drip tray 6 into the guide rails on
the underside of the appliance (see fold-out
page).
5) Insert the plug into a mains power socket.
Before fi rst use
1) Grease the griddles 2/3/4 lightly with
butter, margarine or oil which is suitable for
baking/grilling. This makes it easier to remove
any cooking residue on the griddles 2/3/4.
2) Set the thermostat 9 to level 3 and allow the
appliance to heat up for 5 minutes.
3) After 5 minutes, turn the thermostat 9 back to
level 0.
4) Then disconnect the plug and allow the appli-
ance to cool down.
NOTE
The fi rst time the appliance heats up, a small
amount of smoke and smell may be gener-
ated due to production-related residues. This
is completely normal and is not dangerous.
Provide suffi cient ventilation by opening a
window, for example.
5) Wipe the griddles 2/3/4 with a moist cloth.
Ensure that all parts are completely dry before
operating the appliance.
The appliance is now ready for use.
Thermostat settings
Level 0: Grill switched off
Level 0–2 Grill switched on;
low temperature
Level 2–3: Grill switched on; medium
temperature (e.g. vegetables)
Level 3–5: Grill switched on;
high temperature (e.g. meat)
Operation
WARNING! RISK OF INJURY!
Once the appliance is in operation, touch it
only using the handles 5/8, the handle of
the contact grill lid 1 or the thermostat 9.
Risk of burning!
We recommend the use of oven gloves.
Once the fat drip tray 6 has been pushed in and
the mains plug has been connected to the power
supply:
1) Adjust the thermostat 9 to the desired temper-
ature level. The indicator lamp 0 illuminates.
When the set temperature has been reached,
the temperature indicator lamp 0 goes out.
LB1.indb 26LB1.indb 26 13.11.13 15:4813.11.13 15:48
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKTG 2200 A1 - IAN 93493 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKTG 2200 A1 - IAN 93493 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info