Manual Silvercrest SKMH 1100 A1 - IAN 114279 (page 96 of 102) (English, German, Dutch, French)

600793

Zoom out

Zoom in

1/102

10. Cleaning and maintaining the appliance

Warning! To prevent the risk of

electric shock, injury or damage:

• Always take the mains plug out of its

socket before cleaning.

• Never immerse the base unit 17 in water.

• Remember that the blades in the blender

jug 20 are extremely sharp. Never

touch them with your bare hands to

avoid cutting yourself.

Caution! Never use scouring, corrosive or

abrasive cleaning materials as these might

damage the appliance.

10.1 Cleaning the base unit

1. Clean the base unit 17 with a damp

cloth. A little detergent may also be

used.

2. Wipe over with clean water.

3. Do not use the base unit 17 again until it

is completely dry.

10.2 Cleaning the blender jug

1. Place the blender jug 6 containing the

blade assembly on the appliance 20.

2. Half fill it with hot water.

3. Put the lids for the blender jug 25 and its

fill opening with measuring scale 26 in

place.

4. Insert the power supply plug into a

suitable mains socket (see “3. Technical

data” on page 78).

5. Press the pulse button briefly several

times 9.

6. Take the jug 6 off the appliance.

7. Pour away the water.

The blender jug 6 is now pre-cleaned.

8. Remove the blade assembly 20 (see

“7.2 Inserting and removing the blade

assembly” on page 85)..

9. Clean the blender jug 6 by hand in the

sink with soapy water.

10.Then rinse it 6 thoroughly under clear

water.

11. Allow the jug 6 to dry completely before

using it again.

10.3 Cleaning the accessories

Warning! The blade

assembly 20 has very sharp

blades. To avoid injury, please

observe the following information:

• Remember that the blades of the

assembly 20 are extremely sharp.

Never touch them with your bare hands

to avoid cutting yourself.

• When washing up by hand, the water

should be clear enough that you can

easily see the blade assembly 20 and

do not risk cutting yourself on its

extremely sharp blades.

1. Remove the blade assembly 20 from the

blender jug 6 (see “7.2 Inserting and

removing the blade assembly” on

page 85).

2. Remove the seal 19 from the blade

assembly 20.

3. Remove the seal 24 from the lid of the

blender jug 25.

4. Remove the seal 5 from the drip tray 4.

5. Clean all the accessories by hand in the

sink.

6. Allow all parts to become completely

dry.

7. Replace the seal 5 in the drip tray 4.

RP114279 Küchenmaschine mit Heizung LB2 Seite 94 Montag, 12. Januar 2015 9:50 09

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKMH 1100 A1 - IAN 114279 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SKMH 1100 A1 - IAN 114279 Manual

Product: