649214

Silvercrest SKM 550 B1 - IAN 274393 Manual

27
Zoom out
Zoom in
Previous page
1/272
Next page
GB
│
IE 
│
 23 ■
SKM 550 B1
After using your appliance
1) Switch the appliance off using the rotary
switch ..
2) Turn the continuous shredder anti-clockwise
and remove it.
3) Disassemble the continuous shredder and
clean all parts as shown in the section “Clean-
ing and care”.
Working with the blender
WARNING! RISK OF INJURY!
► Allow hot fluids to cool to a lukewarm tem-
perature (approx. 30 - 40°C) before pouring
them into the blender .
WARNING! RISK OF INJURY FROM
SHARP KNIFE/ROTATING DRIVE!
► Never put your hand into the attached
blender while it is running!
► Remove the blade from the blender only
when it is at a complete standstill.
► Only use the blender with the lid firmly in
position.
► In cases of malfunction, switch the appliance
off and remove the plug from the wall socket.
This will prevent the appliance from becoming
switched on again unintentionally.
Proceed as follows to prepare the appliance for
operation using the blender :
1) Press down the release button ! and move
the pivot arm 0 into operating position 3
(see the section “Operating positions”).
2) Remove the protective cover for the blender
drive hub (turn so that the marking “
” on
the protective cover for the blender drive hub is
in line with the marking “
” on the appliance
itself) (Image F).
3) Position the blender on top of the appliance
(so that the marking “
” on the blender
lines up with the marking “ ” on the appli-
ance).
Turn the blender anti-clockwise until the stop
(so that the marking “ ” on the blender
lines up with the marking “ ” on the appli-
ance itself) (Image G).
4) Add the ingredients.
– Maximum fill quantity: approx. 1 litre;
– Foaming liquids, maximum 0.5 litre;
– Ideal processing quantity for solids: 50 - 100 g.
NOTE
► Take note of the table in the section
"Recommended filling quantities".
5) Place the lid onto the measuring jug slightly
offset and then turn it until the lid clicks into
place (Image I).
6) Turn the rotary switch . to the required setting.
Adding more ingredients
1) Switch the appliance off using the rotary switch ..
2) Rotate the lid of the blender a little (Image I),
remove the lid and add the ingredients you
want to mix
or
3) Rotate the measuring jug, which is placed in
the lid of the blender , by 90° and remove it.
Then gradually add the solid ingredients
using the opening provided for this purpose.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKM 550 B1 - IAN 274393 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKM 550 B1 - IAN 274393 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info